Round galvanized steel spiral duct with continuous helical lock seam

クリーンルーム空気分配システム

Spiral 亜鉛メッキ鋼管

A round galvanized steel duct formed with a continuous spiral lock seam for rigid, aerodynamically efficient cleanroom supply and return routes.

Continuous Spiral Lock Seam
Rigid Round Geometry
Low-Friction Air Path
Gasketed Fitting System

見積もりリクエスト製品案内

商品紹介

Spiral duct is manufactured by helically forming galvanized strip into a rigid round tube with a continuous locked seam. The circular cross-section resists pressure deformation efficiently and usually requires less reinforcement than a broad rectangular panel. Factory-made elbows, branches and reducers use male insertion ends with double-lip gaskets or sealed slip joints. Exposed installations benefit from the regular spiral appearance, while concealed cleanroom services gain a compact duct with predictable support and airflow characteristics.

主要な特徴

The helical lock seam stiffens the duct wall along its full length without separate external bracing.

A circular bore distributes internal pressure uniformly and supports smooth airflow through long runs.

Double-lip gasketed fittings shorten assembly time and create repeatable insertion joints.

Standard round accessories simplify changes in diameter, direction and branch layout.

お客様の製品に関する懸念事項

Round duct routes must balance ceiling-space use, joint leakage, hanger spacing and clean fitting transitions at every branch.

Thin round duct ovalizes during transport or hanging.Spiral seam stiffness and correctly spaced circular supports retain the designed diameter.

Field-applied sealant is inconsistent around every fitting.Factory-fitted double-lip gaskets provide uniform circumferential sealing at insertion joints.

Abrupt branch fittings create turbulence and excess pressure loss.Swept bends and gradual conical transitions preserve the round flow path.

Condensation forms on exposed cold supply duct.A continuous external vapor-sealed insulation system is added for the scheduled air temperature and humidity.

典型的な用途

Cleanroom supply-air branchesExposed technical-space ductworkReturn-air systemsLaboratory general exhaustAir-handling equipment connections

技術的なパラメータ

Typical manufacturing ranges for galvanized spiral duct used in HVAC air distribution are listed below.

コア材料	Hot-dip galvanized carbon-steel strip
パネルの厚さ	0.45–0.90 mm spiral-formed wall
有効幅	80–1250 mm nominal internal diameter
最大長さ	3000–6000 mm standard straight length
鋼鉄の厚さを直面する	0.45–0.90 mm galvanized steel wall
コア密度	Approximately 7850 kg/m³ solid steel construction
熱伝導率	Approximately 48–54 W/(m·K) for spiral-forming galvanized strip
表面仕上げ	Bright galvanized surface with optional external powder coating
ジョイントタイプ	Gasketed male-female slip joint secured with screws or sealed rivets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Galvanized, aluminum or stainless constructionFactory-applied external insulationPowder-coated exposed finishGasketed elbows, tees and reducers

Planning a Spiral Galvanized Steel Duct specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する