Equipamento de descontaminação de pessoal e materiais

Material Air-Shower Pass Box

A timed material chamber that uses filtered cleaning jets and return grilles to remove loose particles from compatible packages.

Directional Cleaning Jets
Timed De-Dusting Cycle
Low-Level Particle Returns
Interlocked Transfer Route

Solicite um orçamento. Browse produtos

Introdução do produto

The material air-shower pass box integrates an interlocked transfer cabinet with a fan, filtration circuit and adjustable nozzles. After the loading door closes, filtered air accelerates through ceiling and side outlets towards the package. Return grilles collect displaced particles before the receiving side becomes available.

Características-chave

Adjustable nozzle direction addresses upper, side and lower package surfaces.

The controller separates blow time, settling time and door release.

Low-level returns capture particles displaced from cartons and reusable totes.

Removable nozzle panels provide service access to the airflow plenum.

Fan speed can be adapted to load stability and label durability.

Preocupações do produto do cliente

Package de-dusting requires sufficient surface air movement without damaging light loads or allowing particles to resettle.

One-sided air leaves dust on top and lower carton faces.Multi-directional nozzles are arranged around the payload volume.

Particles settle back after the cleaning blast stops.Return airflow continues through a controlled settling period.

Strong jets move light packaging or lift labels.Variable fan speed and nozzle orientation can be set for the actual load.

Operators bypass cleaning during frequent transfers.The interlock begins the timed sequence and blocks early clean-side access.

Aplicações típicas

Raw-material entryPharmaceutical warehouse transferElectronics containersClean garment bundles

Parâmetros técnicos

Typical construction ranges for a material air-shower pass box are listed below.

Material principal	SUS 304 chamber with centrifugal blower, prefilter, HEPA filter, adjustable nozzles and low returns
Painel de espessura	100-180 mm nozzle-plenum and double-wall construction
Largura efetiva	600-1200 mm clear payload width
Comprimento máximo	Up to 1600 mm chamber depth
Aço enfrentando espessura	1.0-1.5 mm stainless-steel facing
Densidade Core	35-40 kg/m³ polyurethane insulation around nozzle and filter plenums
Condutividade térmica	0.022-0.028 W/(m·K) for polyurethane plenum insulation
Superfície acabado	Brushed stainless chamber with polished nozzles and removable return grilles
Tipo conjunto	Sealed plenum joints with interlocked gasketed doors and bolted nozzle-service panels
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Two-side or three-side nozzle layoutVariable-speed cleaning airflowRoller conveyor floorAutomatic sliding doors

Planning a Material Air-Shower Pass Box specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe