Material air-shower pass box with upper blower housing and glazed doors

人員 · 材料の汚染除去設備

Material エアシャワーパスボックス

A timed material chamber that uses filtered cleaning jets and return grilles to remove loose particles from compatible packages.

Directional Cleaning Jets
Timed De-Dusting Cycle
Low-Level Particle Returns
Interlocked Transfer Route

見積もりリクエスト製品案内

商品紹介

The material air-shower pass box integrates an interlocked transfer cabinet with a fan, filtration circuit and adjustable nozzles. After the loading door closes, filtered air accelerates through ceiling and side outlets towards the package. Return grilles collect displaced particles before the receiving side becomes available.

主要な特徴

Adjustable nozzle direction addresses upper, side and lower package surfaces.

The controller separates blow time, settling time and door release.

Low-level returns capture particles displaced from cartons and reusable totes.

Removable nozzle panels provide service access to the airflow plenum.

Fan speed can be adapted to load stability and label durability.

お客様の製品に関する懸念事項

Package de-dusting requires sufficient surface air movement without damaging light loads or allowing particles to resettle.

One-sided air leaves dust on top and lower carton faces.Multi-directional nozzles are arranged around the payload volume.

Particles settle back after the cleaning blast stops.Return airflow continues through a controlled settling period.

Strong jets move light packaging or lift labels.Variable fan speed and nozzle orientation can be set for the actual load.

Operators bypass cleaning during frequent transfers.The interlock begins the timed sequence and blocks early clean-side access.

典型的な用途

Raw-material entryPharmaceutical warehouse transferElectronics containersClean garment bundles

技術的なパラメータ

Typical construction ranges for a material air-shower pass box are listed below.

コア材料	SUS 304 chamber with centrifugal blower, prefilter, HEPA filter, adjustable nozzles and low returns
パネルの厚さ	100-180 mm nozzle-plenum and double-wall construction
有効幅	600-1200 mm clear payload width
最大長さ	Up to 1600 mm chamber depth
鋼鉄の厚さを直面する	1.0 — 1.5mm ステンレス鋼の面
コア密度	35-40 kg/m³ polyurethane insulation around nozzle and filter plenums
熱伝導率	0.022 — 0.028 W / （ m · K ）ポリウレタンプレネム絶縁材
表面仕上げ	Brushed stainless chamber with polished nozzles and removable return grilles
ジョイントタイプ	Sealed plenum joints with interlocked gasketed doors and bolted nozzle-service panels
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Two-side or three-side nozzle layoutVariable-speed cleaning airflowRoller conveyor floorAutomatic sliding doors

Planning a Material Air-Shower Pass Box specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する