Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Material Air-Shower Pass Box
A timed material chamber that uses filtered cleaning jets and return grilles to remove loose particles from compatible packages.
- Directional Cleaning Jets
- Timed De-Dusting Cycle
- Low-Level Particle Returns
- Interlocked Transfer Route
Introducción del producto
The material air-shower pass box integrates an interlocked transfer cabinet with a fan, filtration circuit and adjustable nozzles. After the loading door closes, filtered air accelerates through ceiling and side outlets towards the package. Return grilles collect displaced particles before the receiving side becomes available.
Características clave
The controller separates blow time, settling time and door release.
Low-level returns capture particles displaced from cartons and reusable totes.
Removable nozzle panels provide service access to the airflow plenum.
Fan speed can be adapted to load stability and label durability.
Preocupaciones del producto del cliente
Package de-dusting requires sufficient surface air movement without damaging light loads or allowing particles to resettle.
One-sided air leaves dust on top and lower carton faces.Multi-directional nozzles are arranged around the payload volume.
Particles settle back after the cleaning blast stops.Return airflow continues through a controlled settling period.
Strong jets move light packaging or lift labels.Variable fan speed and nozzle orientation can be set for the actual load.
Operators bypass cleaning during frequent transfers.The interlock begins the timed sequence and blocks early clean-side access.
Aplicaciones típicas
Raw-material entryPharmaceutical warehouse transferElectronics containersClean garment bundles
Parámetros técnicos
Typical construction ranges for a material air-shower pass box are listed below.
| Materiales Core | SUS 304 chamber with centrifugal blower, prefilter, HEPA filter, adjustable nozzles and low returns |
|---|---|
| Panel de espesor | 100-180 mm nozzle-plenum and double-wall construction |
| Ancho efectivo | 600-1200 mm clear payload width |
| Longitud máxima | Up to 1600 mm chamber depth |
| Acero frente a espesor | 1.0-1.5 mm stainless-steel facing |
| Densidad Core | 35-40 kg/m³ polyurethane insulation around nozzle and filter plenums |
| Conductividad térmica | 0.022-0.028 W/(m·K) for polyurethane plenum insulation |
| Superficie acabada | Brushed stainless chamber with polished nozzles and removable return grilles |
| Tipo conjunto | Sealed plenum joints with interlocked gasketed doors and bolted nozzle-service panels |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Two-side or three-side nozzle layoutVariable-speed cleaning airflowRoller conveyor floorAutomatic sliding doors
Planning a Material Air-Shower Pass Box specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
