English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
Material الهواء دش تمرير مربع
A timed material chamber that uses filtered cleaning jets and return grilles to remove loose particles from compatible packages.
- Directional Cleaning Jets
- Timed De-Dusting Cycle
- Low-Level Particle Returns
- Interlocked Transfer Route
مقدمة المنتج
The material air-shower pass box integrates an interlocked transfer cabinet with a fan, filtration circuit and adjustable nozzles. After the loading door closes, filtered air accelerates through ceiling and side outlets towards the package. Return grilles collect displaced particles before the receiving side becomes available.
الخصائص الرئيسية
The controller separates blow time, settling time and door release.
Low-level returns capture particles displaced from cartons and reusable totes.
Removable nozzle panels provide service access to the airflow plenum.
Fan speed can be adapted to load stability and label durability.
مخاوف المنتج للعملاء
Package de-dusting requires sufficient surface air movement without damaging light loads or allowing particles to resettle.
One-sided air leaves dust on top and lower carton faces.Multi-directional nozzles are arranged around the payload volume.
Particles settle back after the cleaning blast stops.Return airflow continues through a controlled settling period.
Strong jets move light packaging or lift labels.Variable fan speed and nozzle orientation can be set for the actual load.
Operators bypass cleaning during frequent transfers.The interlock begins the timed sequence and blocks early clean-side access.
تطبيقات نموذجية
Raw-material entryPharmaceutical warehouse transferElectronics containersClean garment bundles
المعلمات الفنية
Typical construction ranges for a material air-shower pass box are listed below.
| المواد الأساسية | SUS 304 chamber with centrifugal blower, prefilter, HEPA filter, adjustable nozzles and low returns |
|---|---|
| سمك اللوحة | 100-180 mm nozzle-plenum and double-wall construction |
| العرض الفعال | 600-1200 mm clear payload width |
| الحد الأقصى الطول | Up to 1600 mm chamber depth |
| الصلب يواجه سمك | 1.0-1.5 mm stainless-steel facing |
| الكثافة الأساسية | 35-40 kg/m³ polyurethane insulation around nozzle and filter plenums |
| الموصلية الحرارية | 0.022-0.028 W/(m·K) for polyurethane plenum insulation |
| إنهاء السطح | Brushed stainless chamber with polished nozzles and removable return grilles |
| نوع المشترك | Sealed plenum joints with interlocked gasketed doors and bolted nozzle-service panels |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Two-side or three-side nozzle layoutVariable-speed cleaning airflowRoller conveyor floorAutomatic sliding doors
Planning a Material Air-Shower Pass Box specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
