Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Diffusor de ar linear
An extruded aluminum one- to six-slot diffuser that forms an adjustable horizontal or vertical plane jet along cleanroom ceilings and walls.
- One to Six Linear Slots
- Adjustable Plane Jet
- Continuous Run Alignment
- Detachable Extruded Core
Introdução do produto
The linear slot air diffuser provides a narrow architectural outlet where long, controlled plane jets are preferred to square ceiling terminals. Extruded aluminum frames maintain straight slot edges, and paired internal deflection vanes rotate to direct air along the ceiling, down a wall or into the room. Individual lengths connect with alignment strips to form continuous visual runs. The removable core exposes the balancing module and plenum for cleaning without disturbing the finished ceiling border.
Características-chave
Extruded frame sections hold a straight consistent line through individual and continuous-run installations.
One- to six-slot configurations cover different airflow duties without changing the product family appearance.
The complete slot core detaches to reach the plenum, adjustment module and downstream duct surface.
Preocupações do produto do cliente
A continuous slot system must maintain a straight appearance and consistent throw along its full length while preserving access to concealed balancing components.
Adjacent diffuser sections show visible steps or changing slot width.Rigid extrusions and internal alignment strips hold modular sections on one continuous centerline.
Supply air detaches from the ceiling when branch airflow is reduced.Profiled deflection vanes preserve a controlled Coanda jet over a broad operating range.
The plenum damper cannot be reached after the ceiling is closed.A detachable core provides room-side access to the measuring and adjustment module.
A single inlet leaves one end of a long slot under-supplied.Long sections use multiple gasketed spigots and a full-length plenum to equalize pressure.
Aplicações típicas
Cleanroom perimeter air distributionLong pharmaceutical corridorsLaboratory ceiling and wall supplyClean office glazing zonesContinuous exhaust slots above process support areas
Parâmetros técnicos
Typical construction data for a cleanroom linear slot diffuser and matching plenum are listed below.
| Material principal | Extruded aluminum frame and deflection vanes with galvanized-steel balancing plenum |
|---|---|
| Painel de espessura | 1.2–2.0 mm aluminum extrusion wall thickness |
| Largura efetiva | 38–250 mm nominal face width for one to six slots |
| Comprimento máximo | Up to 2000 mm per section with aligned continuous runs |
| Aço enfrentando espessura | 0.8–1.0 mm galvanized-steel plenum casing |
| Densidade Core | Approximately 2700 kg/m³ for the extruded aluminum diffuser components |
| Condutividade térmica | Approximately 200–210 W/(m·K) for the extruded aluminum diffuser components |
| Superfície acabado | White epoxy-polyester powder coat or clear anodized aluminum |
| Tipo conjunto | Alignment-strip section joints with concealed frame fixing and gasketed round plenum spigots |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
One to six active slotsStandard, narrow or concealed border frameSupply, extract or filtered-extract plenumSingle lengths or aligned continuous runs
Planning a Linear Slot Air Diffuser specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
