Long white linear slot air diffuser with adjustable black deflection vanes

Sistem Distribusi Udara Cleanroom

Linear Slot Air Diffuser Linear Slot Air Diffuser

An extruded aluminum one- to six-slot diffuser that forms an adjustable horizontal or vertical plane jet along cleanroom ceilings and walls.

One to Six Linear Slots
Adjustable Plane Jet
Continuous Run Alignment
Detachable Extruded Core

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The linear slot air diffuser provides a narrow architectural outlet where long, controlled plane jets are preferred to square ceiling terminals. Extruded aluminum frames maintain straight slot edges, and paired internal deflection vanes rotate to direct air along the ceiling, down a wall or into the room. Individual lengths connect with alignment strips to form continuous visual runs. The removable core exposes the balancing module and plenum for cleaning without disturbing the finished ceiling border.

Fitur utama:

Paired aluminum deflection vanes redirect the plane jet without changing the visible slot width.

Extruded frame sections hold a straight consistent line through individual and continuous-run installations.

One- to six-slot configurations cover different airflow duties without changing the product family appearance.

The complete slot core detaches to reach the plenum, adjustment module and downstream duct surface.

Kekhawatiran produk pelanggan

A continuous slot system must maintain a straight appearance and consistent throw along its full length while preserving access to concealed balancing components.

Adjacent diffuser sections show visible steps or changing slot width.Rigid extrusions and internal alignment strips hold modular sections on one continuous centerline.

Supply air detaches from the ceiling when branch airflow is reduced.Profiled deflection vanes preserve a controlled Coanda jet over a broad operating range.

The plenum damper cannot be reached after the ceiling is closed.A detachable core provides room-side access to the measuring and adjustment module.

A single inlet leaves one end of a long slot under-supplied.Long sections use multiple gasketed spigots and a full-length plenum to equalize pressure.

Aplikasi yang Tipis

Cleanroom perimeter air distributionLong pharmaceutical corridorsLaboratory ceiling and wall supplyClean office glazing zonesContinuous exhaust slots above process support areas

Parameter teknis

Typical construction data for a cleanroom linear slot diffuser and matching plenum are listed below.

Bahan inti	Extruded aluminum frame and deflection vanes with galvanized-steel balancing plenum
Ketebalan Panel (Panel Thickness)	1.2–2.0 mm aluminum extrusion wall thickness
Efektif lebar	38–250 mm nominal face width for one to six slots
Panjang maksimum	Up to 2000 mm per section with aligned continuous runs
Baja menghadap ketebalan	0.8–1.0 mm galvanized-steel plenum casing
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the extruded aluminum diffuser components
Konduktivitas Termal (Thermal Conductivity)	Approximately 200–210 W/(m·K) for the extruded aluminum diffuser components
Permukaan selesai	White epoxy-polyester powder coat or clear anodized aluminum
Jenis Bersama	Alignment-strip section joints with concealed frame fixing and gasketed round plenum spigots
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

One to six active slotsStandard, narrow or concealed border frameSupply, extract or filtered-extract plenumSingle lengths or aligned continuous runs

Planning a Linear Slot Air Diffuser specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami