İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Hava Dağıtım Sistemleri
Linear Slot Air Diffuser
An extruded aluminum one- to six-slot diffuser that forms an adjustable horizontal or vertical plane jet along cleanroom ceilings and walls.
- One to Six Linear Slots
- Adjustable Plane Jet
- Continuous Run Alignment
- Detachable Extruded Core
Ürün tanıtımı
The linear slot air diffuser provides a narrow architectural outlet where long, controlled plane jets are preferred to square ceiling terminals. Extruded aluminum frames maintain straight slot edges, and paired internal deflection vanes rotate to direct air along the ceiling, down a wall or into the room. Individual lengths connect with alignment strips to form continuous visual runs. The removable core exposes the balancing module and plenum for cleaning without disturbing the finished ceiling border.
Ana Özellikler
Extruded frame sections hold a straight consistent line through individual and continuous-run installations.
One- to six-slot configurations cover different airflow duties without changing the product family appearance.
The complete slot core detaches to reach the plenum, adjustment module and downstream duct surface.
Müşteri Ürün Sorunları
A continuous slot system must maintain a straight appearance and consistent throw along its full length while preserving access to concealed balancing components.
Adjacent diffuser sections show visible steps or changing slot width.Rigid extrusions and internal alignment strips hold modular sections on one continuous centerline.
Supply air detaches from the ceiling when branch airflow is reduced.Profiled deflection vanes preserve a controlled Coanda jet over a broad operating range.
The plenum damper cannot be reached after the ceiling is closed.A detachable core provides room-side access to the measuring and adjustment module.
A single inlet leaves one end of a long slot under-supplied.Long sections use multiple gasketed spigots and a full-length plenum to equalize pressure.
Tipik uygulamalar
Cleanroom perimeter air distributionLong pharmaceutical corridorsLaboratory ceiling and wall supplyClean office glazing zonesContinuous exhaust slots above process support areas
Teknik parametreler
Typical construction data for a cleanroom linear slot diffuser and matching plenum are listed below.
| Temel malzemeler | Extruded aluminum frame and deflection vanes with galvanized-steel balancing plenum |
|---|---|
| Panel kalınlığı | 1.2–2.0 mm aluminum extrusion wall thickness |
| Effective Width (Etkili Genişlik) | 38–250 mm nominal face width for one to six slots |
| Maksimum uzunluk | Up to 2000 mm per section with aligned continuous runs |
| Çelik yüz yüze kalınlığı | 0.8–1.0 mm galvanized-steel plenum casing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ for the extruded aluminum diffuser components |
| Termal İletkenlik | Approximately 200–210 W/(m·K) for the extruded aluminum diffuser components |
| Yüzey bitirme | White epoxy-polyester powder coat or clear anodized aluminum |
| Ortak tip | Alignment-strip section joints with concealed frame fixing and gasketed round plenum spigots |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
One to six active slotsStandard, narrow or concealed border frameSupply, extract or filtered-extract plenumSingle lengths or aligned continuous runs
Planning a Linear Slot Air Diffuser specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
