Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de alta velocidade Roll-up
A fast flexible door with a moisture-resistant closed-cell foam curtain and thermally separated guides for openings that must control both traffic and temperature loss.
- Temperature-Controlled Storage
- 25 mm Flexible Insulation
- Aluminum or Stainless Frame
- Low-Temperature Configuration
Introdução do produto
The Insulated High-Speed Roll-Up Door combines a laterally stable flexible panel with a closed-cell foam core, vapor-resistant skins and full-height side seals. Integrated thermal breaks reduce direct conduction through the frame, while rapid travel limits warm-air and moisture exchange. The curtain remains vertically flexible so it can roll around the header drum and release under impact. This configuration is suited to conditioned production rooms, cold preparation zones and material routes where a single thin PVC curtain would provide insufficient thermal separation.
Características-chave
Moisture-resistant outer skins protect the core from condensation and repeated cleaning.
Thermally separated side columns interrupt conductive paths around the opening perimeter.
Fast opening limits infiltration before the insulated curtain reseals the doorway.
Break-away bottom construction reduces repair time after accidental vehicle contact.
Preocupações do produto do cliente
A thin curtain permits rapid heat gain and condensation near the opening.The laminated closed-cell foam layer adds thermal resistance while preserving roll-up operation.
Frame conduction creates cold bridges and frost around side columns.Integrated thermal breaks and separated guide components reduce direct conductive paths.
Moisture can migrate into absorbent insulation and degrade performance.Closed-cell foam and sealed non-porous skins resist vapor penetration during normal service.
Rigid insulated doors open too slowly for frequent material movement.A lightweight flexible insulated panel cycles rapidly and clears the full opening vertically.
Aplicações típicas
Temperature-controlled pharmaceutical storageCold preparation roomsFood and beverage clean processingConditioned packaging linesMaterial transfer between different temperature zones
Parâmetros técnicos
| Material principal | Closed-cell flexible foam laminated between reinforced moisture-resistant curtain skins |
|---|---|
| Painel de espessura | Approximately 25 mm insulated flexible curtain |
| Largura efetiva | 1000–3650 mm clear opening |
| Comprimento máximo | Up to 6400 mm clear opening height |
| Aço enfrentando espessura | Not applicable to the curtain; structural side-column covers typically 1.5–3.0 mm |
| Densidade Core | 35–55 kg/m³ closed-cell foam |
| Condutividade térmica | Approximately 0.030–0.040 W/(m·K) for the foam layer |
| Superfície acabado | Reinforced non-porous curtain skins with aluminum, fiberglass-composite or stainless frame surfaces |
| Tipo conjunto | Roll-up insulated curtain with full-height multi-lip side seals, top loop seal and flexible bottom seal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Low-temperature side-guide heatingVision windows for traffic awarenessStainless hygienic frame packageAutomatic vehicle or touchless activation
Planning a Insulated High-Speed Roll-Up Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
