Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
I insulated porte roulante haute vitesse
A fast flexible door with a moisture-resistant closed-cell foam curtain and thermally separated guides for openings that must control both traffic and temperature loss.
- Temperature-Controlled Storage
- 25 mm Flexible Insulation
- Aluminum or Stainless Frame
- Low-Temperature Configuration
Introduction de produit
The Insulated High-Speed Roll-Up Door combines a laterally stable flexible panel with a closed-cell foam core, vapor-resistant skins and full-height side seals. Integrated thermal breaks reduce direct conduction through the frame, while rapid travel limits warm-air and moisture exchange. The curtain remains vertically flexible so it can roll around the header drum and release under impact. This configuration is suited to conditioned production rooms, cold preparation zones and material routes where a single thin PVC curtain would provide insufficient thermal separation.
Key Features
Moisture-resistant outer skins protect the core from condensation and repeated cleaning.
Thermally separated side columns interrupt conductive paths around the opening perimeter.
Fast opening limits infiltration before the insulated curtain reseals the doorway.
Break-away bottom construction reduces repair time after accidental vehicle contact.
Préoccupations du client produit
A thin curtain permits rapid heat gain and condensation near the opening.The laminated closed-cell foam layer adds thermal resistance while preserving roll-up operation.
Frame conduction creates cold bridges and frost around side columns.Integrated thermal breaks and separated guide components reduce direct conductive paths.
Moisture can migrate into absorbent insulation and degrade performance.Closed-cell foam and sealed non-porous skins resist vapor penetration during normal service.
Rigid insulated doors open too slowly for frequent material movement.A lightweight flexible insulated panel cycles rapidly and clears the full opening vertically.
Les applications typiques
Temperature-controlled pharmaceutical storageCold preparation roomsFood and beverage clean processingConditioned packaging linesMaterial transfer between different temperature zones
Paramètres techniques
| Matériaux de base | Closed-cell flexible foam laminated between reinforced moisture-resistant curtain skins |
|---|---|
| Panneau épaisseur | Approximately 25 mm insulated flexible curtain |
| Largeur effective | 1000–3650 mm clear opening |
| Longueur maximale | Up to 6400 mm clear opening height |
| Acier face épaisseur | Not applicable to the curtain; structural side-column covers typically 1.5–3.0 mm |
| Densité Core | 35–55 kg/m³ closed-cell foam |
| Conductivité thermique | Approximately 0.030–0.040 W/(m·K) for the foam layer |
| surface finie | Reinforced non-porous curtain skins with aluminum, fiberglass-composite or stainless frame surfaces |
| Type joint | Roll-up insulated curtain with full-height multi-lip side seals, top loop seal and flexible bottom seal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Low-temperature side-guide heatingVision windows for traffic awarenessStainless hygienic frame packageAutomatic vehicle or touchless activation
Planning a Insulated High-Speed Roll-Up Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
