Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Puerta aislada de alta velocidad Roll-up
A fast flexible door with a moisture-resistant closed-cell foam curtain and thermally separated guides for openings that must control both traffic and temperature loss.
- Temperature-Controlled Storage
- 25 mm Flexible Insulation
- Aluminum or Stainless Frame
- Low-Temperature Configuration
Introducción del producto
The Insulated High-Speed Roll-Up Door combines a laterally stable flexible panel with a closed-cell foam core, vapor-resistant skins and full-height side seals. Integrated thermal breaks reduce direct conduction through the frame, while rapid travel limits warm-air and moisture exchange. The curtain remains vertically flexible so it can roll around the header drum and release under impact. This configuration is suited to conditioned production rooms, cold preparation zones and material routes where a single thin PVC curtain would provide insufficient thermal separation.
Características clave
Moisture-resistant outer skins protect the core from condensation and repeated cleaning.
Thermally separated side columns interrupt conductive paths around the opening perimeter.
Fast opening limits infiltration before the insulated curtain reseals the doorway.
Break-away bottom construction reduces repair time after accidental vehicle contact.
Preocupaciones del producto del cliente
A thin curtain permits rapid heat gain and condensation near the opening.The laminated closed-cell foam layer adds thermal resistance while preserving roll-up operation.
Frame conduction creates cold bridges and frost around side columns.Integrated thermal breaks and separated guide components reduce direct conductive paths.
Moisture can migrate into absorbent insulation and degrade performance.Closed-cell foam and sealed non-porous skins resist vapor penetration during normal service.
Rigid insulated doors open too slowly for frequent material movement.A lightweight flexible insulated panel cycles rapidly and clears the full opening vertically.
Aplicaciones típicas
Temperature-controlled pharmaceutical storageCold preparation roomsFood and beverage clean processingConditioned packaging linesMaterial transfer between different temperature zones
Parámetros técnicos
| Materiales Core | Closed-cell flexible foam laminated between reinforced moisture-resistant curtain skins |
|---|---|
| Panel de espesor | Approximately 25 mm insulated flexible curtain |
| Ancho efectivo | 1000–3650 mm clear opening |
| Longitud máxima | Up to 6400 mm clear opening height |
| Acero frente a espesor | Not applicable to the curtain; structural side-column covers typically 1.5–3.0 mm |
| Densidad Core | 35–55 kg/m³ closed-cell foam |
| Conductividad térmica | Approximately 0.030–0.040 W/(m·K) for the foam layer |
| Superficie acabada | Reinforced non-porous curtain skins with aluminum, fiberglass-composite or stainless frame surfaces |
| Tipo conjunto | Roll-up insulated curtain with full-height multi-lip side seals, top loop seal and flexible bottom seal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Low-temperature side-guide heatingVision windows for traffic awarenessStainless hygienic frame packageAutomatic vehicle or touchless activation
Planning a Insulated High-Speed Roll-Up Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
