Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Eletrodo Humidificador
A matched set of large-area stainless steel electrodes for restoring controlled steam generation in a compatible serviceable electrode humidifier cylinder.
- Large-Area Stainless Blades
- Matched Three-Piece Set
- Insulated Plug Terminals
- Replaceable Cylinder Component
Introdução do produto
The humidifier electrode is the immersed current-carrying component inside a serviceable electrode steam cylinder. Conductive feedwater completes the electrical path between the stainless steel surfaces, so heat is produced directly in the water rather than by a separate resistance element. Each replacement uses a broad stainless blade joined to rigid support rods, an insulated upper terminal and sealing hardware at the cylinder interface. Electrode length, immersed area, terminal arrangement and set quantity must match the humidifier model because water conductivity and steam demand influence current distribution and normal surface wear.
Características-chave
Paired support rods maintain the blade position while carrying the terminal assembly above the water space.
A brass retaining shoulder and high-temperature insulating cap separate the electrical connection from the wetted blade.
Matched replacement sets keep electrode geometry and initial active length consistent within the steam cylinder.
Preocupações do produto do cliente
Electrode replacement must preserve the original immersed geometry, terminal assignment and cylinder seal while accounting for wear caused by the actual feedwater and steam load.
An electrode with the wrong active length or blade width changes the immersed surface area and operating current.The replacement set is selected by humidifier model, original blade dimensions, terminal position and required cylinder geometry.
Replacing only one heavily worn part can leave unequal electrode lengths and unbalanced current distribution.A complete matched set provides consistent blade geometry and starting length across all three electrode positions.
Incorrect plug assignment can place the supply lead or sensor connection on the wrong terminal.Terminal positions, connector style and identification colors are recorded before removal and reproduced in the replacement arrangement.
Reused or poorly seated sealing rings can allow steam or water to escape around the electrode supports.Compatible new O-rings and retaining hardware are fitted at the cylinder penetrations and checked for even seating during assembly.
Aplicações típicas
Serviceable electrode steam humidifiersCleanroom AHU humidification sectionsCommercial HVAC steam generatorsElectrode-cylinder maintenance programs
Parâmetros técnicos
The following ranges cover common removable large-area stainless steel electrode sets used in serviceable commercial steam humidifier cylinders.
| Material principal | Austenitic stainless steel blade and support rods with brass retainer and high-temperature polymer insulator |
|---|---|
| Painel de espessura | 18-35 mm nominal outside diameter of the upper insulated terminal assembly |
| Largura efetiva | 35-100 mm nominal large-area electrode blade width |
| Comprimento máximo | 80-300 mm selectable initial electrode length for common serviceable cylinder sizes |
| Aço enfrentando espessura | 1.5-3.0 mm nominal stainless steel blade thickness |
| Densidade Core | Approximately 7900-8000 kg/m³ for austenitic stainless steel components |
| Condutividade térmica | Approximately 14-16 W/(m·K) for austenitic stainless steel near room temperature |
| Superfície acabado | Clean satin stainless steel blade and rods with warm brass shoulder and matte-black insulating cap |
| Tipo conjunto | Welded blade-to-rod construction with retained insulated plug terminal and O-ring cylinder seal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Matched electrode length and blade widthThree-piece replacement setTerminal and plug identification arrangementCompatible hand-nut and O-ring service kit
Planning a Humidifier Electrode specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
