Three-quarter view of a matched three-piece stainless steel steam humidifier electrode set

Alat ganti peralatan bilik bersih

Elektrod Humidifier

A matched set of large-area stainless steel electrodes for restoring controlled steam generation in a compatible serviceable electrode humidifier cylinder.

Large-Area Stainless Blades
Matched Three-Piece Set
Insulated Plug Terminals
Replaceable Cylinder Component

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The humidifier electrode is the immersed current-carrying component inside a serviceable electrode steam cylinder. Conductive feedwater completes the electrical path between the stainless steel surfaces, so heat is produced directly in the water rather than by a separate resistance element. Each replacement uses a broad stainless blade joined to rigid support rods, an insulated upper terminal and sealing hardware at the cylinder interface. Electrode length, immersed area, terminal arrangement and set quantity must match the humidifier model because water conductivity and steam demand influence current distribution and normal surface wear.

Ciri-ciri Utama

Broad stainless steel blade surfaces provide a defined immersed area for conductive steam generation.

Paired support rods maintain the blade position while carrying the terminal assembly above the water space.

A brass retaining shoulder and high-temperature insulating cap separate the electrical connection from the wetted blade.

Matched replacement sets keep electrode geometry and initial active length consistent within the steam cylinder.

Kebimbangan Produk Pelanggan

Electrode replacement must preserve the original immersed geometry, terminal assignment and cylinder seal while accounting for wear caused by the actual feedwater and steam load.

An electrode with the wrong active length or blade width changes the immersed surface area and operating current.The replacement set is selected by humidifier model, original blade dimensions, terminal position and required cylinder geometry.

Replacing only one heavily worn part can leave unequal electrode lengths and unbalanced current distribution.A complete matched set provides consistent blade geometry and starting length across all three electrode positions.

Incorrect plug assignment can place the supply lead or sensor connection on the wrong terminal.Terminal positions, connector style and identification colors are recorded before removal and reproduced in the replacement arrangement.

Reused or poorly seated sealing rings can allow steam or water to escape around the electrode supports.Compatible new O-rings and retaining hardware are fitted at the cylinder penetrations and checked for even seating during assembly.

Permohonan yang biasa

Serviceable electrode steam humidifiersCleanroom AHU humidification sectionsCommercial HVAC steam generatorsElectrode-cylinder maintenance programs

Parameter teknikal

The following ranges cover common removable large-area stainless steel electrode sets used in serviceable commercial steam humidifier cylinders.

Bahan Teras	Austenitic stainless steel blade and support rods with brass retainer and high-temperature polymer insulator
Ketebalan Panel	18-35 mm nominal outside diameter of the upper insulated terminal assembly
Lebar berkesan	35-100 mm nominal large-area electrode blade width
Panjang maksimum	80-300 mm selectable initial electrode length for common serviceable cylinder sizes
Keluli Menghadapi Ketebalan	1.5-3.0 mm nominal stainless steel blade thickness
Ketumpatan teras	Approximately 7900-8000 kg/m³ for austenitic stainless steel components
Kekonduksian Terma	Approximately 14-16 W/(m·K) for austenitic stainless steel near room temperature
Kemasan permukaan	Clean satin stainless steel blade and rods with warm brass shoulder and matte-black insulating cap
Jenis Bersatu	Welded blade-to-rod construction with retained insulated plug terminal and O-ring cylinder seal
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Matched electrode length and blade widthThree-piece replacement setTerminal and plug identification arrangementCompatible hand-nut and O-ring service kit

Planning a Humidifier Electrode specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami