Z Unidade de filtro de ventilador de alto fluxo de ar
- Twin Matched EC Blowers
- Large 1200 mm Module Format
- Broad Active Filter Area
- Balanced Dual-Inlet Plenum
Introdução do produto
The high-airflow fan filter unit expands both the filter face and fan capacity. Two matched EC blowers feed separate zones of a common reinforced plenum, while a central controller maintains coordinated speed. The large active filter area distributes the combined flow across a broad ceiling footprint and reduces the number of individual modules needed above a high-demand work zone. Internal splitters and a full-width diffuser prevent the two fan streams from producing a visible centerline or opposing jets.
Características-chave
A divided inlet plenum equalizes the two fan streams before they reach the common final-filter face.
The 1200 mm square housing covers a large ceiling area while using one power and control connection.
A reinforced perimeter and intermediate cross-member support the wide filter and diffuser against bowing.
Preocupações do produto do cliente
High airflow from one ceiling bay must remain uniform across a large face without overloading a single motor or distorting the filter frame.
Aplicações típicas
Parâmetros técnicos
Typical materials and dimensional ranges for a large-format high-airflow fan filter unit are listed below.
| Material principal | Reinforced aluminium plenum, two backward-curved EC blowers and a large-area micro-glass HEPA or ULPA filter pack |
|---|---|
| Painel de espessura | 350-480 mm overall module depth |
| Largura efetiva | 1130-1200 mm nominal module width |
| Comprimento máximo | Up to 1200 mm standard square module length |
| Aço enfrentando espessura | 1.0-1.5 mm optional stainless or powder-coated steel reinforcement and diffuser sheet |
| Densidade Core | Approximately 90-120 kg/m³ nominal compacted density of the large-area micro-glass filter pack |
| Condutividade térmica | Approximately 0.035-0.043 W/(m·K) for the large-area micro-glass pack used in the high-airflow FFU |
| Superfície acabado | Natural anodized aluminium with white perforated diffuser and colored closed-cell perimeter gasket |
| Tipo conjunto | Reinforced wide-span ceiling flange with continuous perimeter gasket and supported compression-seal filter frame |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Planning a High-Airflow Fan Filter Unit specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã