English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
FFU ومعدات تنقية الهواء الطرفية
وحدة تصفية مروحة تدفق الهواء العالي
A large-format FFU with two matched EC blowers and a broad final-filter face for supplying substantially more clean air from a single reinforced ceiling module.
- Twin Matched EC Blowers
- Large 1200 mm Module Format
- Broad Active Filter Area
- Balanced Dual-Inlet Plenum
مقدمة المنتج
The high-airflow fan filter unit expands both the filter face and fan capacity. Two matched EC blowers feed separate zones of a common reinforced plenum, while a central controller maintains coordinated speed. The large active filter area distributes the combined flow across a broad ceiling footprint and reduces the number of individual modules needed above a high-demand work zone. Internal splitters and a full-width diffuser prevent the two fan streams from producing a visible centerline or opposing jets.
الخصائص الرئيسية
A divided inlet plenum equalizes the two fan streams before they reach the common final-filter face.
The 1200 mm square housing covers a large ceiling area while using one power and control connection.
A reinforced perimeter and intermediate cross-member support the wide filter and diffuser against bowing.
مخاوف المنتج للعملاء
High airflow from one ceiling bay must remain uniform across a large face without overloading a single motor or distorting the filter frame.
Several small FFUs require many power drops, controllers and ceiling penetrations over one work zone.A large dual-blower module consolidates airflow, power and control into one reinforced ceiling footprint.
A single central blower creates excessive velocity beneath the hub and weak flow at the far corners.Twin fans, a divided inlet and broad distribution chamber spread the flow before the common filter face.
A wide unsupported final filter can bow, unseat its gasket or touch the downstream diffuser.Intermediate structural support and a rigid perimeter frame maintain filter compression across the full span.
Mismatched fan speeds create an uneven outlet pattern and unnecessary turbulence along the module centerline.The common EC controller synchronizes both blowers and allows the two sections to be balanced as one unit.
تطبيقات نموذجية
High-coverage semiconductor clean zonesLarge laminar-flow work areasBattery and precision-component productionCleanrooms with limited ceiling-module positionsHigh-air-change process rooms
المعلمات الفنية
Typical materials and dimensional ranges for a large-format high-airflow fan filter unit are listed below.
| المواد الأساسية | Reinforced aluminium plenum, two backward-curved EC blowers and a large-area micro-glass HEPA or ULPA filter pack |
|---|---|
| سمك اللوحة | 350-480 mm overall module depth |
| العرض الفعال | 1130-1200 mm nominal module width |
| الحد الأقصى الطول | Up to 1200 mm standard square module length |
| الصلب يواجه سمك | 1.0-1.5 mm optional stainless or powder-coated steel reinforcement and diffuser sheet |
| الكثافة الأساسية | Approximately 90-120 kg/m³ nominal compacted density of the large-area micro-glass filter pack |
| الموصلية الحرارية | Approximately 0.035-0.043 W/(m·K) for the large-area micro-glass pack used in the high-airflow FFU |
| إنهاء السطح | Natural anodized aluminium with white perforated diffuser and colored closed-cell perimeter gasket |
| نوع المشترك | Reinforced wide-span ceiling flange with continuous perimeter gasket and supported compression-seal filter frame |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
1200 × 1200 mm or large rectangular footprintTwin synchronized EC blowersHigh-capacity HEPA or ULPA filterLocal, 0–10 V or network group control
Planning a High-Airflow Fan Filter Unit specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
