Three-quarter view of a high-airflow fan filter unit with twin EC blowers and broad diffuser

УФУ и терминальное оборудование для очистки воздуха

Фильтры вентилятора высокого расхода воздуха

A large-format FFU with two matched EC blowers and a broad final-filter face for supplying substantially more clean air from a single reinforced ceiling module.

Twin Matched EC Blowers
Large 1200 mm Module Format
Broad Active Filter Area
Balanced Dual-Inlet Plenum

Запрос котировки Просмотреть продукты

Введение продукции

The high-airflow fan filter unit expands both the filter face and fan capacity. Two matched EC blowers feed separate zones of a common reinforced plenum, while a central controller maintains coordinated speed. The large active filter area distributes the combined flow across a broad ceiling footprint and reduces the number of individual modules needed above a high-demand work zone. Internal splitters and a full-width diffuser prevent the two fan streams from producing a visible centerline or opposing jets.

Основные характеристики

Two EC blowers share the airflow duty and can operate at lower individual speed than one compact high-speed fan.

A divided inlet plenum equalizes the two fan streams before they reach the common final-filter face.

The 1200 mm square housing covers a large ceiling area while using one power and control connection.

A reinforced perimeter and intermediate cross-member support the wide filter and diffuser against bowing.

Обеспокоенность клиентов продуктами

High airflow from one ceiling bay must remain uniform across a large face without overloading a single motor or distorting the filter frame.

Several small FFUs require many power drops, controllers and ceiling penetrations over one work zone.A large dual-blower module consolidates airflow, power and control into one reinforced ceiling footprint.

A single central blower creates excessive velocity beneath the hub and weak flow at the far corners.Twin fans, a divided inlet and broad distribution chamber spread the flow before the common filter face.

A wide unsupported final filter can bow, unseat its gasket or touch the downstream diffuser.Intermediate structural support and a rigid perimeter frame maintain filter compression across the full span.

Mismatched fan speeds create an uneven outlet pattern and unnecessary turbulence along the module centerline.The common EC controller synchronizes both blowers and allows the two sections to be balanced as one unit.

Типичные приложения

High-coverage semiconductor clean zonesLarge laminar-flow work areasBattery and precision-component productionCleanrooms with limited ceiling-module positionsHigh-air-change process rooms

Технические параметры

Typical materials and dimensional ranges for a large-format high-airflow fan filter unit are listed below.

Основной материал	Reinforced aluminium plenum, two backward-curved EC blowers and a large-area micro-glass HEPA or ULPA filter pack
Толщина панели	350-480 mm overall module depth
эффективная ширина	1130-1200 mm nominal module width
Максимальная длина	Up to 1200 mm standard square module length
Толщина линий стали	1.0-1.5 mm optional stainless or powder-coated steel reinforcement and diffuser sheet
Плотность ядра	Approximately 90-120 kg/m³ nominal compacted density of the large-area micro-glass filter pack
Теплопроводимость	Approximately 0.035-0.043 W/(m·K) for the large-area micro-glass pack used in the high-airflow FFU
Поверхностная отделка	Natural anodized aluminium with white perforated diffuser and colored closed-cell perimeter gasket
Объединенный тип	Reinforced wide-span ceiling flange with continuous perimeter gasket and supported compression-seal filter frame
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

1200 × 1200 mm or large rectangular footprintTwin synchronized EC blowersHigh-capacity HEPA or ULPA filterLocal, 0–10 V or network group control

Planning a High-Airflow Fan Filter Unit specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой