Three-quarter view of a blue flexible duct connector with galvanized flanges

Acessórios de instalação de sala limpa

Conector de dutos flexíveis

A blue coated-fabric sleeve between galvanized rectangular flanges that decouples limited vibration and movement in cleanroom ductwork.

Blue Coated Fabric
Twin Galvanized Flanges
Vibration Decoupling
Rectangular Air Passage

Solicite um orçamento. Browse produtos

Introdução do produto

Two galvanized rectangular end flanges are joined by a sewn blue coated-fabric sleeve, creating a hollow air passage with a flexible wall section between rigid duct connections.

Características-chave

Flexible fabric interrupts direct vibration transfer.

Twin flanges provide defined bolted interfaces.

Coated fabric limits air leakage through the sleeve.

Corner holes support repeatable alignment.

Preocupações do produto do cliente

Rigid duct connections can transmit fan vibration and stress adjacent sheet-metal joints.

Equipment vibration travels into ductwork.The fabric sleeve decouples limited movement.

Misaligned ends load rigid joints.The flexible span accommodates small installation offsets.

Uncoated fabric leaks air.A continuous coated textile forms the air barrier.

Weak edge attachment can peel.Fabric edges are continuously retained at both flanges.

Aplicações típicas

Fan discharge jointsAir-handler connectionsCleanroom supply ductsExhaust equipment transitions

Parâmetros técnicos

Typical construction ranges for a rectangular flexible duct connector are listed below.

Material principal	Blue coated polyester or glass-fiber fabric with galvanized steel flanges
Painel de espessura	0.50-2.00 mm coated fabric composite thickness
Largura efetiva	100-1500 mm rectangular clear opening width
Comprimento máximo	Up to 2000 mm flange side length
Aço enfrentando espessura	1.00-3.00 mm galvanized flange thickness
Densidade Core	Approximately 500-1500 kg/m³ coated fabric composite basis
Condutividade térmica	Approximately 0.04-0.20 W/(m·K) for coated textile
Superfície acabado	Blue smooth coated fabric with silver galvanized flanges
Tipo conjunto	Bolted twin-flange joint with sewn or bonded flexible sleeve
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Different fabric coatingsCustom flange dimensionsStainless flangesAlternative sleeve lengths

Planning a Flexible Duct Connector specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe