Three-quarter view of a blue flexible duct connector with galvanized flanges

Aksesori Pemasangan Bilik Bersih

Penyambung Saluran Fleksibel

A blue coated-fabric sleeve between galvanized rectangular flanges that decouples limited vibration and movement in cleanroom ductwork.

Blue Coated Fabric
Twin Galvanized Flanges
Vibration Decoupling
Rectangular Air Passage

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Two galvanized rectangular end flanges are joined by a sewn blue coated-fabric sleeve, creating a hollow air passage with a flexible wall section between rigid duct connections.

Ciri-ciri Utama

Flexible fabric interrupts direct vibration transfer.

Twin flanges provide defined bolted interfaces.

Coated fabric limits air leakage through the sleeve.

Corner holes support repeatable alignment.

Kebimbangan Produk Pelanggan

Rigid duct connections can transmit fan vibration and stress adjacent sheet-metal joints.

Equipment vibration travels into ductwork.The fabric sleeve decouples limited movement.

Misaligned ends load rigid joints.The flexible span accommodates small installation offsets.

Uncoated fabric leaks air.A continuous coated textile forms the air barrier.

Weak edge attachment can peel.Fabric edges are continuously retained at both flanges.

Permohonan yang biasa

Fan discharge jointsAir-handler connectionsCleanroom supply ductsExhaust equipment transitions

Parameter teknikal

Typical construction ranges for a rectangular flexible duct connector are listed below.

Bahan Teras	Blue coated polyester or glass-fiber fabric with galvanized steel flanges
Ketebalan Panel	0.50-2.00 mm coated fabric composite thickness
Lebar berkesan	100-1500 mm rectangular clear opening width
Panjang maksimum	Up to 2000 mm flange side length
Keluli Menghadapi Ketebalan	1.00-3.00 mm galvanized flange thickness
Ketumpatan teras	Approximately 500-1500 kg/m³ coated fabric composite basis
Kekonduksian Terma	Approximately 0.04-0.20 W/(m·K) for coated textile
Kemasan permukaan	Blue smooth coated fabric with silver galvanized flanges
Jenis Bersatu	Bolted twin-flange joint with sewn or bonded flexible sleeve
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Different fabric coatingsCustom flange dimensionsStainless flangesAlternative sleeve lengths

Planning a Flexible Duct Connector specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami