Three-quarter view of a blue flexible duct connector with galvanized flanges

Temiz Oda Kurulum Aksesuarları

Flexible Duct Bağlayıcı

A blue coated-fabric sleeve between galvanized rectangular flanges that decouples limited vibration and movement in cleanroom ductwork.

Blue Coated Fabric
Twin Galvanized Flanges
Vibration Decoupling
Rectangular Air Passage

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Two galvanized rectangular end flanges are joined by a sewn blue coated-fabric sleeve, creating a hollow air passage with a flexible wall section between rigid duct connections.

Ana Özellikler

Flexible fabric interrupts direct vibration transfer.

Twin flanges provide defined bolted interfaces.

Coated fabric limits air leakage through the sleeve.

Corner holes support repeatable alignment.

Müşteri Ürün Sorunları

Rigid duct connections can transmit fan vibration and stress adjacent sheet-metal joints.

Equipment vibration travels into ductwork.The fabric sleeve decouples limited movement.

Misaligned ends load rigid joints.The flexible span accommodates small installation offsets.

Uncoated fabric leaks air.A continuous coated textile forms the air barrier.

Weak edge attachment can peel.Fabric edges are continuously retained at both flanges.

Tipik uygulamalar

Fan discharge jointsAir-handler connectionsCleanroom supply ductsExhaust equipment transitions

Teknik parametreler

Typical construction ranges for a rectangular flexible duct connector are listed below.

Temel malzemeler	Blue coated polyester or glass-fiber fabric with galvanized steel flanges
Panel kalınlığı	0.50-2.00 mm coated fabric composite thickness
Effective Width (Etkili Genişlik)	100-1500 mm rectangular clear opening width
Maksimum uzunluk	Up to 2000 mm flange side length
Çelik yüz yüze kalınlığı	1.00-3.00 mm galvanized flange thickness
Core Density (Çekirdek Yoğunluğu)	Approximately 500-1500 kg/m³ coated fabric composite basis
Termal İletkenlik	Approximately 0.04-0.20 W/(m·K) for coated textile
Yüzey bitirme	Blue smooth coated fabric with silver galvanized flanges
Ortak tip	Bolted twin-flange joint with sewn or bonded flexible sleeve
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Different fabric coatingsCustom flange dimensionsStainless flangesAlternative sleeve lengths

Planning a Flexible Duct Connector specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun