Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Z chuveiro de ar limpo resistente à explosão
A reinforced air shower configuration with a stainless passage, bonded metalwork and segregated electrical and fan service areas for defined hazardous-process environments.
- Segregated Service Area
- Bonded Metal Enclosure
- Reinforced Stainless Passage
- Filtered Particle Removal
Introdução do produto
This air shower configuration separates the occupied cleaning passage from the fan, control and cable-entry service area. Its stainless enclosure and bonded exposed metalwork provide a robust, non-flaking surface, while filtered recirculated air maintains the garment-cleaning function. Component selection and the final electrical arrangement must be matched to the actual process environment and operating conditions.
Características-chave
Bonding points connect exposed panels, door frames and nozzle assemblies to a common grounding path.
Reinforced fan housings and guards protect rotating equipment in industrial service.
Stainless interior surfaces avoid loose coating flakes.
Gasketed access covers help maintain a closed service enclosure.
Preocupações do produto do cliente
Personnel cleaning near a sensitive process requires a construction concept that addresses the site's actual operating environment rather than relying on an ordinary enclosure shell.
Controls and fan components need separation from the personnel cleaning passage.A dedicated sealed service compartment can locate those components outside the occupied chamber.
High-velocity airflow can leave isolated metal parts at different electrical potentials.Bonding provisions connect panels, doors and nozzle plates to a common grounding route.
Cable penetrations can become paths for dust or vapour migration.Gasketed covers and appropriately selected cable-entry hardware close the enclosure penetrations.
A coated interior may chip in demanding industrial use.An exposed stainless passage provides a durable cleanable surface without a decorative paint layer.
Aplicações típicas
Chemical powder process entrancesSolvent-handling controlled roomsBattery material processingIndustrial coating clean areas
Parâmetros técnicos
The ranges below describe a robust stainless enclosure; final component selection depends on the intended environment.
| Material principal | Bonded SUS 304 or SUS 316L enclosure with a separated fan-control service compartment, H13 HEPA stage and conductive metal nozzle system |
|---|---|
| Painel de espessura | 75 mm mineral-wool insulated safety panels |
| Largura efetiva | 800-1500 mm clear personnel passage width |
| Comprimento máximo | Up to 3000 mm modular chamber length |
| Aço enfrentando espessura | 1.2-1.5 mm stainless steel facing and reinforced service covers |
| Densidade Core | 100-120 kg/m³ mineral-wool insulation core |
| Condutividade térmica | 0.038-0.045 W/(m·K) for the dense mineral-wool panel |
| Superfície acabado | Brushed stainless steel with bonded conductive hardware and sealed cable-entry surfaces |
| Tipo conjunto | Bolted gasketed conductive panel joints with bonded door frames and segregated service penetrations |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
SUS 304 or SUS 316L enclosureSite-selected motor and lighting packageRemote control-cabinet locationConductive flooring and grounding monitor
Planning a Explosion-Resistant Cleanroom Air Shower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
