English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Персонал и оборудование для дезактивации материалов
Взрывостойкий воздушный душ в чистой комнате
A reinforced air shower configuration with a stainless passage, bonded metalwork and segregated electrical and fan service areas for defined hazardous-process environments.
- Segregated Service Area
- Bonded Metal Enclosure
- Reinforced Stainless Passage
- Filtered Particle Removal
Введение продукции
This air shower configuration separates the occupied cleaning passage from the fan, control and cable-entry service area. Its stainless enclosure and bonded exposed metalwork provide a robust, non-flaking surface, while filtered recirculated air maintains the garment-cleaning function. Component selection and the final electrical arrangement must be matched to the actual process environment and operating conditions.
Основные характеристики
Bonding points connect exposed panels, door frames and nozzle assemblies to a common grounding path.
Reinforced fan housings and guards protect rotating equipment in industrial service.
Stainless interior surfaces avoid loose coating flakes.
Gasketed access covers help maintain a closed service enclosure.
Обеспокоенность клиентов продуктами
Personnel cleaning near a sensitive process requires a construction concept that addresses the site's actual operating environment rather than relying on an ordinary enclosure shell.
Controls and fan components need separation from the personnel cleaning passage.A dedicated sealed service compartment can locate those components outside the occupied chamber.
High-velocity airflow can leave isolated metal parts at different electrical potentials.Bonding provisions connect panels, doors and nozzle plates to a common grounding route.
Cable penetrations can become paths for dust or vapour migration.Gasketed covers and appropriately selected cable-entry hardware close the enclosure penetrations.
A coated interior may chip in demanding industrial use.An exposed stainless passage provides a durable cleanable surface without a decorative paint layer.
Типичные приложения
Chemical powder process entrancesSolvent-handling controlled roomsBattery material processingIndustrial coating clean areas
Технические параметры
The ranges below describe a robust stainless enclosure; final component selection depends on the intended environment.
| Основной материал | Bonded SUS 304 or SUS 316L enclosure with a separated fan-control service compartment, H13 HEPA stage and conductive metal nozzle system |
|---|---|
| Толщина панели | 75 mm mineral-wool insulated safety panels |
| эффективная ширина | 800-1500 mm clear personnel passage width |
| Максимальная длина | Up to 3000 mm modular chamber length |
| Толщина линий стали | 1.2-1.5 mm stainless steel facing and reinforced service covers |
| Плотность ядра | 100-120 kg/m³ mineral-wool insulation core |
| Теплопроводимость | 0.038-0.045 W/(m·K) for the dense mineral-wool panel |
| Поверхностная отделка | Brushed stainless steel with bonded conductive hardware and sealed cable-entry surfaces |
| Объединенный тип | Bolted gasketed conductive panel joints with bonded door frames and segregated service penetrations |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
SUS 304 or SUS 316L enclosureSite-selected motor and lighting packageRemote control-cabinet locationConductive flooring and grounding monitor
Planning a Explosion-Resistant Cleanroom Air Shower specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
