Complete reinforced stainless explosion-resistant cleanroom air shower in three-quarter view

Peralatan Dekontaminasi Kakitangan dan Bahan

Mandi Udara Bilik Bersih Tahan Letupan

A reinforced air shower configuration with a stainless passage, bonded metalwork and segregated electrical and fan service areas for defined hazardous-process environments.

Segregated Service Area
Bonded Metal Enclosure
Reinforced Stainless Passage
Filtered Particle Removal

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This air shower configuration separates the occupied cleaning passage from the fan, control and cable-entry service area. Its stainless enclosure and bonded exposed metalwork provide a robust, non-flaking surface, while filtered recirculated air maintains the garment-cleaning function. Component selection and the final electrical arrangement must be matched to the actual process environment and operating conditions.

Ciri-ciri Utama

Controls and cable entries can be concentrated in a segregated service compartment.

Bonding points connect exposed panels, door frames and nozzle assemblies to a common grounding path.

Reinforced fan housings and guards protect rotating equipment in industrial service.

Stainless interior surfaces avoid loose coating flakes.

Gasketed access covers help maintain a closed service enclosure.

Kebimbangan Produk Pelanggan

Personnel cleaning near a sensitive process requires a construction concept that addresses the site's actual operating environment rather than relying on an ordinary enclosure shell.

Controls and fan components need separation from the personnel cleaning passage.A dedicated sealed service compartment can locate those components outside the occupied chamber.

High-velocity airflow can leave isolated metal parts at different electrical potentials.Bonding provisions connect panels, doors and nozzle plates to a common grounding route.

Cable penetrations can become paths for dust or vapour migration.Gasketed covers and appropriately selected cable-entry hardware close the enclosure penetrations.

A coated interior may chip in demanding industrial use.An exposed stainless passage provides a durable cleanable surface without a decorative paint layer.

Permohonan yang biasa

Chemical powder process entrancesSolvent-handling controlled roomsBattery material processingIndustrial coating clean areas

Parameter teknikal

The ranges below describe a robust stainless enclosure; final component selection depends on the intended environment.

Bahan Teras	Bonded SUS 304 or SUS 316L enclosure with a separated fan-control service compartment, H13 HEPA stage and conductive metal nozzle system
Ketebalan Panel	75 mm mineral-wool insulated safety panels
Lebar berkesan	800-1500 mm clear personnel passage width
Panjang maksimum	Up to 3000 mm modular chamber length
Keluli Menghadapi Ketebalan	1.2-1.5 mm stainless steel facing and reinforced service covers
Ketumpatan teras	100-120 kg/m³ mineral-wool insulation core
Kekonduksian Terma	0.038-0.045 W/(m·K) for the dense mineral-wool panel
Kemasan permukaan	Brushed stainless steel with bonded conductive hardware and sealed cable-entry surfaces
Jenis Bersatu	Bolted gasketed conductive panel joints with bonded door frames and segregated service penetrations
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

SUS 304 or SUS 316L enclosureSite-selected motor and lighting packageRemote control-cabinet locationConductive flooring and grounding monitor

Planning a Explosion-Resistant Cleanroom Air Shower specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami