Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Expansão Anchor
A zinc-plated sleeve anchor that expands mechanically inside a drilled concrete hole to secure cleanroom support frames and brackets.
- Positive Mechanical Expansion
- Slotted Steel Sleeve
- Integrated Nut and Washer
- Immediate Load Transfer
Introdução do produto
The expansion anchor combines a threaded steel shank, slotted cylindrical sleeve, tapered end cone, washer and hex nut. Tightening the nut draws the cone into the sleeve, forcing its segments against the drilled-hole wall to create a mechanical hold. The fixing is suited to cleanroom frames, ceiling supports and service brackets where a direct set-and-tighten installation is preferred in sound concrete.
Características-chave
The supplied washer distributes seating pressure across the attached bracket.
Zinc-plated steel provides a practical finish for dry concealed interior support zones.
Mechanical setting provides an immediately secured connection without resin-curing time.
Preocupações do produto do cliente
Support brackets require a predictable mechanical fixing that can be installed and tightened immediately in sound concrete.
Loose drilled holes allow the anchor to spin during tightening.Matched drill diameter and a cleaned hole let the sleeve engage the substrate uniformly.
Excessive torque can damage the substrate or deform a light bracket.The specified anchor size and setting torque control sleeve expansion and washer pressure.
Short embedment reduces engagement of the expansion zone.Hole depth and anchor length are selected so the full slotted sleeve seats in sound base material.
Unprotected steel can corrode in humid service spaces.Zinc-plated, hot-dip galvanized or stainless material is selected for the exposure.
Aplicações típicas
Cleanroom wall-frame anchorsCeiling support bracketsService channel base platesDoor-frame fixing platesConcrete-mounted utility supports
Parâmetros técnicos
Typical construction and compatibility ranges for a zinc-plated sleeve expansion anchor are listed below.
| Material principal | Zinc-plated carbon-steel bolt, slotted expansion sleeve, cone, washer and nut |
|---|---|
| Painel de espessura | 5-50 mm compatible attached-bracket or fixture thickness |
| Largura efetiva | 8-24 mm nominal anchor and drilled-hole diameter |
| Comprimento máximo | Up to 300 mm overall anchor length |
| Aço enfrentando espessura | 0.80-2.50 mm formed expansion-sleeve wall |
| Densidade Core | Aproximadamente 7850 kg / m3 para componentes de aço carbono |
| Condutividade térmica | 45 - 60 W / (m · K) para aço carbono |
| Superfície acabado | Silver zinc-plated steel or optional passivated stainless steel |
| Tipo conjunto | Torque-set mechanical anchorage with cone-expanded slotted sleeve |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Zinc-plated or stainless steelMultiple anchor diametersStandard or extended fixture thicknessHex nut or bolt-head setting
Planning a Expansion Anchor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
