İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Açıklama Anchor
A zinc-plated sleeve anchor that expands mechanically inside a drilled concrete hole to secure cleanroom support frames and brackets.
- Positive Mechanical Expansion
- Slotted Steel Sleeve
- Integrated Nut and Washer
- Immediate Load Transfer
Ürün tanıtımı
The expansion anchor combines a threaded steel shank, slotted cylindrical sleeve, tapered end cone, washer and hex nut. Tightening the nut draws the cone into the sleeve, forcing its segments against the drilled-hole wall to create a mechanical hold. The fixing is suited to cleanroom frames, ceiling supports and service brackets where a direct set-and-tighten installation is preferred in sound concrete.
Ana Özellikler
The supplied washer distributes seating pressure across the attached bracket.
Zinc-plated steel provides a practical finish for dry concealed interior support zones.
Mechanical setting provides an immediately secured connection without resin-curing time.
Müşteri Ürün Sorunları
Support brackets require a predictable mechanical fixing that can be installed and tightened immediately in sound concrete.
Loose drilled holes allow the anchor to spin during tightening.Matched drill diameter and a cleaned hole let the sleeve engage the substrate uniformly.
Excessive torque can damage the substrate or deform a light bracket.The specified anchor size and setting torque control sleeve expansion and washer pressure.
Short embedment reduces engagement of the expansion zone.Hole depth and anchor length are selected so the full slotted sleeve seats in sound base material.
Unprotected steel can corrode in humid service spaces.Zinc-plated, hot-dip galvanized or stainless material is selected for the exposure.
Tipik uygulamalar
Cleanroom wall-frame anchorsCeiling support bracketsService channel base platesDoor-frame fixing platesConcrete-mounted utility supports
Teknik parametreler
Typical construction and compatibility ranges for a zinc-plated sleeve expansion anchor are listed below.
| Temel malzemeler | Zinc-plated carbon-steel bolt, slotted expansion sleeve, cone, washer and nut |
|---|---|
| Panel kalınlığı | 5-50 mm compatible attached-bracket or fixture thickness |
| Effective Width (Etkili Genişlik) | 8-24 mm nominal anchor and drilled-hole diameter |
| Maksimum uzunluk | Up to 300 mm overall anchor length |
| Çelik yüz yüze kalınlığı | 0.80-2.50 mm formed expansion-sleeve wall |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for carbon-steel components |
| Termal İletkenlik | Approximately 45-60 W/(m·K) for carbon steel |
| Yüzey bitirme | Silver zinc-plated steel or optional passivated stainless steel |
| Ortak tip | Torque-set mechanical anchorage with cone-expanded slotted sleeve |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Zinc-plated or stainless steelMultiple anchor diametersStandard or extended fixture thicknessHex nut or bolt-head setting
Planning a Expansion Anchor specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
