English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Аксессуары для установки в чистых помещениях
Расширение якоря
A zinc-plated sleeve anchor that expands mechanically inside a drilled concrete hole to secure cleanroom support frames and brackets.
- Positive Mechanical Expansion
- Slotted Steel Sleeve
- Integrated Nut and Washer
- Immediate Load Transfer
Введение продукции
The expansion anchor combines a threaded steel shank, slotted cylindrical sleeve, tapered end cone, washer and hex nut. Tightening the nut draws the cone into the sleeve, forcing its segments against the drilled-hole wall to create a mechanical hold. The fixing is suited to cleanroom frames, ceiling supports and service brackets where a direct set-and-tighten installation is preferred in sound concrete.
Основные характеристики
The supplied washer distributes seating pressure across the attached bracket.
Zinc-plated steel provides a practical finish for dry concealed interior support zones.
Mechanical setting provides an immediately secured connection without resin-curing time.
Обеспокоенность клиентов продуктами
Support brackets require a predictable mechanical fixing that can be installed and tightened immediately in sound concrete.
Loose drilled holes allow the anchor to spin during tightening.Matched drill diameter and a cleaned hole let the sleeve engage the substrate uniformly.
Excessive torque can damage the substrate or deform a light bracket.The specified anchor size and setting torque control sleeve expansion and washer pressure.
Short embedment reduces engagement of the expansion zone.Hole depth and anchor length are selected so the full slotted sleeve seats in sound base material.
Unprotected steel can corrode in humid service spaces.Zinc-plated, hot-dip galvanized or stainless material is selected for the exposure.
Типичные приложения
Cleanroom wall-frame anchorsCeiling support bracketsService channel base platesDoor-frame fixing platesConcrete-mounted utility supports
Технические параметры
Typical construction and compatibility ranges for a zinc-plated sleeve expansion anchor are listed below.
| Основной материал | Zinc-plated carbon-steel bolt, slotted expansion sleeve, cone, washer and nut |
|---|---|
| Толщина панели | 5-50 mm compatible attached-bracket or fixture thickness |
| эффективная ширина | 8-24 mm nominal anchor and drilled-hole diameter |
| Максимальная длина | Up to 300 mm overall anchor length |
| Толщина линий стали | 0.80-2.50 mm formed expansion-sleeve wall |
| Плотность ядра | Approximately 7850 kg/m³ for carbon-steel components |
| Теплопроводимость | Approximately 45-60 W/(m·K) for carbon steel |
| Поверхностная отделка | Silver zinc-plated steel or optional passivated stainless steel |
| Объединенный тип | Torque-set mechanical anchorage with cone-expanded slotted sleeve |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Zinc-plated or stainless steelMultiple anchor diametersStandard or extended fixture thicknessHex nut or bolt-head setting
Planning a Expansion Anchor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
