Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
ESD e produtos antiestáticos
ESD pulseira
The ESD Wrist Strap is an adjustable conductive-fabric band supplied with a detachable coiled cord for grounding seated operators at protected workstations.
- Conductive elastic band provides 360-degree wrist contact.
- Stainless back plate creates a stable skin interface.
- Detachable coiled lead follows movement without excess loose cable.
Introdução do produto
Elastic nylon containing conductive yarn wraps comfortably around the wrist, while a stainless contact plate and snap transfer charge into the ground lead. The cord includes an in-line current-limiting resistor and terminates in a standard plug or clip selected for the workstation connection. The replaceable two-piece design simplifies daily testing and maintenance.
Características-chave
Conductive fabric maintains contact around the wrist.
Stainless plate resists corrosion from routine use.
Positive snap permits fast cord replacement.
Coiled cable extends with reach and retracts near the bench.
Standard plug interface suits common grounding points and testers.
Preocupações do produto do cliente
Wrist grounding depends on snug conductive contact, intact cord continuity and a secure connection to the designated workstation ground.
A loose band causes intermittent skin contact.Adjustable elastic construction holds the contact plate against the wrist.
A straight cable tangles across the bench.The coiled section retracts when the operator moves closer.
Repeated flexing eventually damages the lead.A detachable cord can be separately tested and replaced.
An accidental pull disconnects equipment or injures the wearer.The snap provides a defined detachable interface at the cuff.
Visual checks miss an open circuit.The complete worn strap is verified with a wrist-strap tester before use.
Aplicações típicas
Seated electronics assembly.Printed circuit board repair.Semiconductor inspection.Static-sensitive laboratory work.Component packing and test benches.
Parâmetros técnicos
The values describe a common single-wire adjustable fabric wrist strap; band color, snap size, cord length and connector format can be selected for the workstation.
| Material principal | Conductive elastic nylon band with insulated copper ground lead |
|---|---|
| Painel de espessura | 1.5–2.5 mm band thickness |
| Largura efetiva | 18–25 mm band width |
| Comprimento máximo | Up to 3600 mm extended coiled-cord length |
| Aço enfrentando espessura | 0.5 mm nominal stainless contact-plate thickness |
| Densidade Core | 300–450 kg/m³ equivalent woven band bulk density |
| Condutividade térmica | 0.05–0.08 W/(m·K) |
| Superfície acabado | Royal blue conductive fabric, polished stainless plate and black insulated cord |
| Tipo conjunto | Adjustable loop band with 4 mm snap and detachable banana-plug coiled cord |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single-wire or dual-wire versions.4 mm, 10 mm and alternative snap sizes.Blue, black, red or yellow bands.1.5 m, 1.8 m, 3 m or 3.6 m extended cord lengths.Banana plug, alligator clip or monitor connector.Metal expansion and cleanroom-compatible band styles.
Planning a ESD Wrist Strap specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
