Blue adjustable ESD wrist strap with complete black coiled grounding cord

ESD および帯電防止製品

ESD リストストラップ

The ESD Wrist Strap is an adjustable conductive-fabric band supplied with a detachable coiled cord for grounding seated operators at protected workstations.

Conductive elastic band provides 360-degree wrist contact.
Stainless back plate creates a stable skin interface.
Detachable coiled lead follows movement without excess loose cable.

見積もりリクエスト製品案内

商品紹介

Elastic nylon containing conductive yarn wraps comfortably around the wrist, while a stainless contact plate and snap transfer charge into the ground lead. The cord includes an in-line current-limiting resistor and terminates in a standard plug or clip selected for the workstation connection. The replaceable two-piece design simplifies daily testing and maintenance.

主要な特徴

Adjustable band fits a broad range of wrist diameters.

Conductive fabric maintains contact around the wrist.

Stainless plate resists corrosion from routine use.

Positive snap permits fast cord replacement.

Coiled cable extends with reach and retracts near the bench.

Standard plug interface suits common grounding points and testers.

お客様の製品に関する懸念事項

Wrist grounding depends on snug conductive contact, intact cord continuity and a secure connection to the designated workstation ground.

A loose band causes intermittent skin contact.Adjustable elastic construction holds the contact plate against the wrist.

A straight cable tangles across the bench.The coiled section retracts when the operator moves closer.

Repeated flexing eventually damages the lead.A detachable cord can be separately tested and replaced.

An accidental pull disconnects equipment or injures the wearer.The snap provides a defined detachable interface at the cuff.

Visual checks miss an open circuit.The complete worn strap is verified with a wrist-strap tester before use.

典型的な用途

Seated electronics assembly.Printed circuit board repair.Semiconductor inspection.Static-sensitive laboratory work.Component packing and test benches.

技術的なパラメータ

The values describe a common single-wire adjustable fabric wrist strap; band color, snap size, cord length and connector format can be selected for the workstation.

コア材料	Conductive elastic nylon band with insulated copper ground lead
パネルの厚さ	1.5–2.5 mm band thickness
有効幅	18–25 mm band width
最大長さ	Up to 3600 mm extended coiled-cord length
鋼鉄の厚さを直面する	0.5 mm nominal stainless contact-plate thickness
コア密度	300–450 kg/m³ equivalent woven band bulk density
熱伝導率	0.05–0.08 W/(m·K)
表面仕上げ	Royal blue conductive fabric, polished stainless plate and black insulated cord
ジョイントタイプ	Adjustable loop band with 4 mm snap and detachable banana-plug coiled cord
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Single-wire or dual-wire versions.4 mm, 10 mm and alternative snap sizes.Blue, black, red or yellow bands.1.5 m, 1.8 m, 3 m or 3.6 m extended cord lengths.Banana plug, alligator clip or monitor connector.Metal expansion and cleanroom-compatible band styles.

Planning a ESD Wrist Strap specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する