Blue adjustable ESD wrist strap with complete black coiled grounding cord

Produits ESD et antistatiques

Z Bracelet ESD

The ESD Wrist Strap is an adjustable conductive-fabric band supplied with a detachable coiled cord for grounding seated operators at protected workstations.

Conductive elastic band provides 360-degree wrist contact.
Stainless back plate creates a stable skin interface.
Detachable coiled lead follows movement without excess loose cable.

Demander un devis. Browse les produits

Introduction de produit

Elastic nylon containing conductive yarn wraps comfortably around the wrist, while a stainless contact plate and snap transfer charge into the ground lead. The cord includes an in-line current-limiting resistor and terminates in a standard plug or clip selected for the workstation connection. The replaceable two-piece design simplifies daily testing and maintenance.

Key Features

Adjustable band fits a broad range of wrist diameters.

Conductive fabric maintains contact around the wrist.

Stainless plate resists corrosion from routine use.

Positive snap permits fast cord replacement.

Coiled cable extends with reach and retracts near the bench.

Standard plug interface suits common grounding points and testers.

Préoccupations du client produit

Wrist grounding depends on snug conductive contact, intact cord continuity and a secure connection to the designated workstation ground.

A loose band causes intermittent skin contact.Adjustable elastic construction holds the contact plate against the wrist.

A straight cable tangles across the bench.The coiled section retracts when the operator moves closer.

Repeated flexing eventually damages the lead.A detachable cord can be separately tested and replaced.

An accidental pull disconnects equipment or injures the wearer.The snap provides a defined detachable interface at the cuff.

Visual checks miss an open circuit.The complete worn strap is verified with a wrist-strap tester before use.

Les applications typiques

Seated electronics assembly.Printed circuit board repair.Semiconductor inspection.Static-sensitive laboratory work.Component packing and test benches.

Paramètres techniques

The values describe a common single-wire adjustable fabric wrist strap; band color, snap size, cord length and connector format can be selected for the workstation.

Matériaux de base	Conductive elastic nylon band with insulated copper ground lead
Panneau épaisseur	1.5–2.5 mm band thickness
Largeur effective	18–25 mm band width
Longueur maximale	Up to 3600 mm extended coiled-cord length
Acier face épaisseur	0.5 mm nominal stainless contact-plate thickness
Densité Core	300–450 kg/m³ equivalent woven band bulk density
Conductivité thermique	0.05–0.08 W/(m·K)
surface finie	Royal blue conductive fabric, polished stainless plate and black insulated cord
Type joint	Adjustable loop band with 4 mm snap and detachable banana-plug coiled cord
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Single-wire or dual-wire versions.4 mm, 10 mm and alternative snap sizes.Blue, black, red or yellow bands.1.5 m, 1.8 m, 3 m or 3.6 m extended cord lengths.Banana plug, alligator clip or monitor connector.Metal expansion and cleanroom-compatible band styles.

Planning a ESD Wrist Strap specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe