Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Produk ESD dan Antistatik

Tali pergelangan tangan ESD

The ESD Wrist Strap is an adjustable conductive-fabric band supplied with a detachable coiled cord for grounding seated operators at protected workstations.
  • Conductive elastic band provides 360-degree wrist contact.
  • Stainless back plate creates a stable skin interface.
  • Detachable coiled lead follows movement without excess loose cable.
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Elastic nylon containing conductive yarn wraps comfortably around the wrist, while a stainless contact plate and snap transfer charge into the ground lead. The cord includes an in-line current-limiting resistor and terminates in a standard plug or clip selected for the workstation connection. The replaceable two-piece design simplifies daily testing and maintenance.

Ciri-ciri Utama

Adjustable band fits a broad range of wrist diameters.

Conductive fabric maintains contact around the wrist.

Stainless plate resists corrosion from routine use.

Positive snap permits fast cord replacement.

Coiled cable extends with reach and retracts near the bench.

Standard plug interface suits common grounding points and testers.

Kebimbangan Produk Pelanggan

Wrist grounding depends on snug conductive contact, intact cord continuity and a secure connection to the designated workstation ground.

A loose band causes intermittent skin contact.Adjustable elastic construction holds the contact plate against the wrist.
A straight cable tangles across the bench.The coiled section retracts when the operator moves closer.
Repeated flexing eventually damages the lead.A detachable cord can be separately tested and replaced.
An accidental pull disconnects equipment or injures the wearer.The snap provides a defined detachable interface at the cuff.
Visual checks miss an open circuit.The complete worn strap is verified with a wrist-strap tester before use.

Permohonan yang biasa

Seated electronics assembly.Printed circuit board repair.Semiconductor inspection.Static-sensitive laboratory work.Component packing and test benches.

Parameter teknikal

The values describe a common single-wire adjustable fabric wrist strap; band color, snap size, cord length and connector format can be selected for the workstation.

Bahan TerasConductive elastic nylon band with insulated copper ground lead
Ketebalan Panel1.5–2.5 mm band thickness
Lebar berkesan18–25 mm band width
Panjang maksimumUp to 3600 mm extended coiled-cord length
Keluli Menghadapi Ketebalan0.5 mm nominal stainless contact-plate thickness
Ketumpatan teras300–450 kg/m³ equivalent woven band bulk density
Kekonduksian Terma0.05–0.08 W/(m·K)
Kemasan permukaanRoyal blue conductive fabric, polished stainless plate and black insulated cord
Jenis BersatuAdjustable loop band with 4 mm snap and detachable banana-plug coiled cord
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Single-wire or dual-wire versions.4 mm, 10 mm and alternative snap sizes.Blue, black, red or yellow bands.1.5 m, 1.8 m, 3 m or 3.6 m extended cord lengths.Banana plug, alligator clip or monitor connector.Metal expansion and cleanroom-compatible band styles.

Planning a ESD Wrist Strap specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami