Complete double-glazed cleanroom partition with flush glass on both faces

Sistemas de parede e teto para sala limpa

Partição de sala limpa de vidro duplo

A twin-pane cleanroom wall system with separate flush glass faces on an 80 mm aluminum-framed module, enclosing a protected cavity for improved acoustic separation and optional blinds.

Flush Glass on Both Sides
Sealed Twin-Pane Cavity
80 mm Partition Depth
Optional Internal Blinds

Solicite um orçamento. Browse produtos

Introdução do produto

Double-Glazed Cleanroom Partitions use two independently framed safety-glass panes hooked onto a steel stud structure. Each pane aligns flush with its room-side frame, leaving a sealed cavity between the two cleanable surfaces. The cavity can house privacy blinds without exposing cords or slats to the controlled rooms. A narrow sealed element joint and concealed support method create a transparent wall that integrates with matching solid partitions while offering more separation than a single pane.

Características-chave

Two room-side glass faces eliminate a recessed sill on either side of the partition.

The enclosed air space improves acoustic separation compared with a single glazed screen.

Protected internal blinds provide privacy control without adding room-side cleaning parts.

Hooked aluminum frames can be removed independently for cavity or glass access.

Laminated and toughened safety-glass choices address different impact and retention needs.

Preocupações do produto do cliente

Double-glazing decisions revolve around cavity cleanliness, privacy devices, acoustic transfer and equal cleanability from both rooms.

A recessed pane creates a sill that collects dust on one side of a thick wall.Separate aluminum frames bring each glass surface flush with its adjacent room finish.

External blinds add cords, slats and brackets that are awkward to disinfect.A sealed inter-pane blind keeps the operating mechanism outside the exposed cleaning surface.

Voices and equipment noise pass readily through a single glass partition.Two panes separated by an air cavity increase the sound-reduction path through the wall.

Contamination trapped inside fixed glazing can remain visible but inaccessible.Independently demountable glazing frames permit controlled access to the internal cavity.

Aplicações típicas

Double-glazed partitions for pharmaceutical process areasOperating-theatre support areasBiotechnology research laboratoriesSemiconductor observation corridorsMedical engineering cleanrooms

Parâmetros técnicos

Representative dimensional ranges for flush double-glazed cleanroom partitions are listed below.

Material principal	N/A — sealed air cavity between two safety-glass panes
Painel de espessura	80 mm partition depth with 6 or 8 mm glass panes
Largura efetiva	1200 mm standard axial module
Comprimento máximo	3500 mm maximum glazing height; 3000 mm as one undivided element
Aço enfrentando espessura	N/A — glazing faces consist of safety glass rather than steel sheet
Densidade Core	N/A — hollow glazing cavity contains no panel core
Condutividade térmica	N/A — whole-system heat transfer depends on pane spacing, glass type and edge construction
Superfície acabado	Flush clear toughened or laminated safety glass in bonded aluminum frames
Tipo conjunto	4 mm sealed element joint with two hooked aluminum glazing frames
Customização	Disponível com base na aplicação pretendida e ambiente operacional

Opções disponíveis

Integral Venetian blindsToughened or laminated glassFull-height or balustrade glazingFrosted or tinted privacy finish

Planning a Double-Glazed Cleanroom Partition specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe