Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Móveis de sala limpa e produtos de aço inoxidável
Cleanroom Resíduos Carrinho
A welded Type 304 stainless waste cart with a gasketed hinged lid, removable blue polymer liner, bag-retaining frame, rear push handle and four non-marking swivel casters.
- Gasketed hinged lid
- Removable blue liner
- Smooth welded waste chamber
- Four non-marking casters
Introdução do produto
The cleanroom waste cart consolidates sealed soft waste and disposable production materials before they leave a controlled area. A smooth Type 304 stainless outer body surrounds a removable blue high-density polyethylene liner, keeping the transport surface separate from the waste bag. The lift-up lid closes against a blue silicone perimeter gasket and is held by a controlled gas-spring mechanism. A rounded rear handle, blue corner bumpers and four swivel casters support movement through doors without exposed sharp edges.
Características-chave
A silicone-gasketed lid limits open exposure while the loaded cart waits for transfer.
The welded stainless chamber has radiused internal corners rather than folded dirt traps.
Blue corner bumpers and non-marking casters protect clean finishes during corridor movement.
Preocupações do produto do cliente
Mobile waste handling must keep the liner retained, shield contents between collection points and remain maneuverable after the load shifts inside the cart.
An unsupported bag collapses into the cart and exposes its contaminated outer surface.A removable rigid liner and stainless retaining frame hold the bag mouth at the chamber rim.
A loose lid swings during transport and contacts nearby walls or personnel.The hinged lid uses a controlled gas spring and a positive closed stop against the perimeter gasket.
Waste liquid reaches folded seams that cannot be inspected during cleaning.The welded inner chamber uses smooth radiused corners and an independently removable liner.
A loaded cart marks wall panels when it turns through narrow transfer doors.Four blue corner bumpers and a rounded push handle define protected contact points.
Aplicações típicas
Pharmaceutical disposable waste transferClean packaging scrap collectionMedical-device assembly waste movementLaboratory consumable disposal routesControlled laundry bag transport
Parâmetros técnicos
Typical configurable specifications for a mobile lidded cleanroom waste cart are listed below.
| Material principal | Type 304 stainless welded outer body with removable blue HDPE liner, silicone lid gasket and blue polyurethane casters |
|---|---|
| Painel de espessura | 1.2 mm welded stainless body and hinged lid panels |
| Largura efetiva | 500 mm internal collection chamber width |
| Comprimento máximo | 850 mm maximum overall length including rear push handle |
| Aço enfrentando espessura | 1.2 mm Type 304 stainless shell; 1.5 mm reinforced rim |
| Densidade Core | 7900–8000 kg/m³ for Type 304 stainless body components |
| Condutividade térmica | 14–17 W/(m·K) for Type 304 stainless body components |
| Superfície acabado | Uniform satin-brushed stainless exterior with smooth welded interior, blue gasket, liner and bumpers |
| Tipo conjunto | Continuous welded body with pinned lid hinge, gas-spring clevis, removable bag frame and threaded caster plates |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
77 L or 120 L chamberTipo 316L Corpo inoxidávelConductive caster setTwo-compartment recycling liner
Planning a Cleanroom Waste Cart specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
