Lidded stainless cleanroom waste cart with blue liner bumpers and casters

Cleanroom Furniture dan Produk Stainless Steel

Keranjang Limbah Ruang Bersih

A welded Type 304 stainless waste cart with a gasketed hinged lid, removable blue polymer liner, bag-retaining frame, rear push handle and four non-marking swivel casters.

Gasketed hinged lid
Removable blue liner
Smooth welded waste chamber
Four non-marking casters

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cleanroom waste cart consolidates sealed soft waste and disposable production materials before they leave a controlled area. A smooth Type 304 stainless outer body surrounds a removable blue high-density polyethylene liner, keeping the transport surface separate from the waste bag. The lift-up lid closes against a blue silicone perimeter gasket and is held by a controlled gas-spring mechanism. A rounded rear handle, blue corner bumpers and four swivel casters support movement through doors without exposed sharp edges.

Fitur utama:

The removable blue liner can be lifted out independently for bag replacement and cleaning.

A silicone-gasketed lid limits open exposure while the loaded cart waits for transfer.

The welded stainless chamber has radiused internal corners rather than folded dirt traps.

Blue corner bumpers and non-marking casters protect clean finishes during corridor movement.

Kekhawatiran produk pelanggan

Mobile waste handling must keep the liner retained, shield contents between collection points and remain maneuverable after the load shifts inside the cart.

An unsupported bag collapses into the cart and exposes its contaminated outer surface.A removable rigid liner and stainless retaining frame hold the bag mouth at the chamber rim.

A loose lid swings during transport and contacts nearby walls or personnel.The hinged lid uses a controlled gas spring and a positive closed stop against the perimeter gasket.

Waste liquid reaches folded seams that cannot be inspected during cleaning.The welded inner chamber uses smooth radiused corners and an independently removable liner.

A loaded cart marks wall panels when it turns through narrow transfer doors.Four blue corner bumpers and a rounded push handle define protected contact points.

Aplikasi yang Tipis

Pharmaceutical disposable waste transferClean packaging scrap collectionMedical-device assembly waste movementLaboratory consumable disposal routesControlled laundry bag transport

Parameter teknis

Typical configurable specifications for a mobile lidded cleanroom waste cart are listed below.

Bahan inti	Type 304 stainless welded outer body with removable blue HDPE liner, silicone lid gasket and blue polyurethane casters
Ketebalan Panel (Panel Thickness)	1.2 mm welded stainless body and hinged lid panels
Efektif lebar	500 mm internal collection chamber width
Panjang maksimum	850 mm maximum overall length including rear push handle
Baja menghadap ketebalan	1.2 mm Type 304 stainless shell; 1.5 mm reinforced rim
Kepadatan inti (core density)	7900–8000 kg/m³ for Type 304 stainless body components
Konduktivitas Termal (Thermal Conductivity)	14–17 W/(m·K) for Type 304 stainless body components
Permukaan selesai	Uniform satin-brushed stainless exterior with smooth welded interior, blue gasket, liner and bumpers
Jenis Bersama	Continuous welded body with pinned lid hinge, gas-spring clevis, removable bag frame and threaded caster plates
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

77 L or 120 L chamberTipe 316L tubuh tahan karatConductive caster setTwo-compartment recycling liner

Planning a Cleanroom Waste Cart specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami