Lidded stainless cleanroom waste cart with blue liner bumpers and casters

Мебель для чистых комнат и изделия из нержавеющей стали

Корзина для отходов в чистых помещениях

A welded Type 304 stainless waste cart with a gasketed hinged lid, removable blue polymer liner, bag-retaining frame, rear push handle and four non-marking swivel casters.

Gasketed hinged lid
Removable blue liner
Smooth welded waste chamber
Four non-marking casters

Запрос котировки Просмотреть продукты

Введение продукции

The cleanroom waste cart consolidates sealed soft waste and disposable production materials before they leave a controlled area. A smooth Type 304 stainless outer body surrounds a removable blue high-density polyethylene liner, keeping the transport surface separate from the waste bag. The lift-up lid closes against a blue silicone perimeter gasket and is held by a controlled gas-spring mechanism. A rounded rear handle, blue corner bumpers and four swivel casters support movement through doors without exposed sharp edges.

Основные характеристики

The removable blue liner can be lifted out independently for bag replacement and cleaning.

A silicone-gasketed lid limits open exposure while the loaded cart waits for transfer.

The welded stainless chamber has radiused internal corners rather than folded dirt traps.

Blue corner bumpers and non-marking casters protect clean finishes during corridor movement.

Обеспокоенность клиентов продуктами

Mobile waste handling must keep the liner retained, shield contents between collection points and remain maneuverable after the load shifts inside the cart.

An unsupported bag collapses into the cart and exposes its contaminated outer surface.A removable rigid liner and stainless retaining frame hold the bag mouth at the chamber rim.

A loose lid swings during transport and contacts nearby walls or personnel.The hinged lid uses a controlled gas spring and a positive closed stop against the perimeter gasket.

Waste liquid reaches folded seams that cannot be inspected during cleaning.The welded inner chamber uses smooth radiused corners and an independently removable liner.

A loaded cart marks wall panels when it turns through narrow transfer doors.Four blue corner bumpers and a rounded push handle define protected contact points.

Типичные приложения

Pharmaceutical disposable waste transferClean packaging scrap collectionMedical-device assembly waste movementLaboratory consumable disposal routesControlled laundry bag transport

Технические параметры

Typical configurable specifications for a mobile lidded cleanroom waste cart are listed below.

Основной материал	Type 304 stainless welded outer body with removable blue HDPE liner, silicone lid gasket and blue polyurethane casters
Толщина панели	1.2 mm welded stainless body and hinged lid panels
эффективная ширина	500 mm internal collection chamber width
Максимальная длина	850 mm maximum overall length including rear push handle
Толщина линий стали	1.2 mm Type 304 stainless shell; 1.5 mm reinforced rim
Плотность ядра	7900–8000 kg/m³ for Type 304 stainless body components
Теплопроводимость	14–17 W/(m·K) for Type 304 stainless body components
Поверхностная отделка	Uniform satin-brushed stainless exterior with smooth welded interior, blue gasket, liner and bumpers
Объединенный тип	Continuous welded body with pinned lid hinge, gas-spring clevis, removable bag frame and threaded caster plates
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

77 L or 120 L chamberType 316L stainless bodyConductive caster setTwo-compartment recycling liner

Planning a Cleanroom Waste Cart specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой