Three-compartment stainless steel cleanroom garment locker

Móveis de sala limpa e produtos de aço inoxidável

Z Locker de vestuário para sala limpa

A three-compartment Type 304L stainless personnel locker that separates each operator's clean garments and footwear behind an individually locked door.

Three independent user compartments
Individual keyed compression locks
Hat shelf garment rail and shoe shelf
Sloped top with raised cleanable base

Solicite um orçamento. Browse produtos

Introdução do produto

The cleanroom garment locker divides a fully welded Type 304L stainless enclosure into three narrow, full-height personnel compartments. Each compartment has its own keyed compression lock, blue identification holder, upper hat shelf, stainless hanging rail and perforated lower shoe shelf, so one operator's gowning set does not mix with another's. The sloped roof removes a horizontal storage ledge, while integral stainless legs leave the floor visible beneath the locker. Folded door returns, sealed divider edges and radiused internal corners support direct wiping without exposed raw edges.

Características-chave

Three separately locked compartments give each operator a defined gowning space without sharing a common door.

An upper shelf, closed-loop hanger rail and perforated lower shoe shelf organize headwear, coveralls and footwear vertically.

Blue identification holders provide a visible assignment point without marking the stainless door surface.

The sloped roof and 150 mm raised base expose the areas where loose items and floor residue commonly accumulate.

Preocupações do produto do cliente

Personnel garments need secure individual storage while the locker itself remains accessible for routine cleaning and assignment changes.

Shared cupboards allow operators to mix coveralls, headwear and personal footwear.Three full-height partitions and separately keyed doors maintain a clear boundary around each user's gowning set.

A single hanging rail leaves masks, hoods and shoes loose on the compartment floor.The hat shelf, closed-loop garment rail and perforated shoe shelf divide the compartment into dedicated storage zones.

Paper name labels leave adhesive residue on brushed stainless doors.Replaceable blue label inserts slide into fixed smooth-edged holders without bonding labels to the door skin.

Flat locker roofs and closed plinths create surfaces that are difficult to inspect.A pitched top discourages overhead storage and raised leveling feet keep the floor perimeter visible.

Aplicações típicas

Pharmaceutical cleanroom changing areasBiotechnology gowning roomsMedical-device cleanroom personnel entrancesMicroelectronics personnel airlocksHygienic food-production changing rooms

Parâmetros técnicos

Typical configurable specifications for a three-compartment stainless cleanroom garment locker are listed below.

Material principal	Type 304L stainless steel welded carcass with three full-height internal dividers, hat shelves, garment rails and perforated shoe shelves
Painel de espessura	1.2–1.5 mm locker body, doors and internal partitions
Largura efetiva	900 mm overall width for three personnel compartments
Comprimento máximo	2000 mm maximum height at the rear of the sloped top
Aço enfrentando espessura	1.2–1.5 mm Type 304L stainless door skins and enclosure panels
Densidade Core	7900 - 8000 kg / m3 para aço inoxidável tipo 304L
Condutividade térmica	14 - 16 W / (m · K) para aço inoxidável tipo 304L
Superfície acabado	Brushed No. 4 stainless with blue identification holders, black keyed locks and blue non-marking leveling pads
Tipo conjunto	Continuously welded carcass and sealed dividers with folded-return doors, concealed hinges and individual compression locks
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

One- through ten-tier door arrangementsType 316L electropolished constructionElectronic combination or RFID locksPerforated doors for ventilated storage

Planning a Cleanroom Garment Locker specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe