Three-compartment stainless steel cleanroom garment locker

Meubles de salle blanche et produits en acier inoxydable

Cleanroom Garment Locker par

A three-compartment Type 304L stainless personnel locker that separates each operator's clean garments and footwear behind an individually locked door.

Three independent user compartments
Individual keyed compression locks
Hat shelf garment rail and shoe shelf
Sloped top with raised cleanable base

Demander un devis. Browse les produits

Introduction de produit

The cleanroom garment locker divides a fully welded Type 304L stainless enclosure into three narrow, full-height personnel compartments. Each compartment has its own keyed compression lock, blue identification holder, upper hat shelf, stainless hanging rail and perforated lower shoe shelf, so one operator's gowning set does not mix with another's. The sloped roof removes a horizontal storage ledge, while integral stainless legs leave the floor visible beneath the locker. Folded door returns, sealed divider edges and radiused internal corners support direct wiping without exposed raw edges.

Key Features

Three separately locked compartments give each operator a defined gowning space without sharing a common door.

An upper shelf, closed-loop hanger rail and perforated lower shoe shelf organize headwear, coveralls and footwear vertically.

Blue identification holders provide a visible assignment point without marking the stainless door surface.

The sloped roof and 150 mm raised base expose the areas where loose items and floor residue commonly accumulate.

Préoccupations du client produit

Personnel garments need secure individual storage while the locker itself remains accessible for routine cleaning and assignment changes.

Shared cupboards allow operators to mix coveralls, headwear and personal footwear.Three full-height partitions and separately keyed doors maintain a clear boundary around each user's gowning set.

A single hanging rail leaves masks, hoods and shoes loose on the compartment floor.The hat shelf, closed-loop garment rail and perforated shoe shelf divide the compartment into dedicated storage zones.

Paper name labels leave adhesive residue on brushed stainless doors.Replaceable blue label inserts slide into fixed smooth-edged holders without bonding labels to the door skin.

Flat locker roofs and closed plinths create surfaces that are difficult to inspect.A pitched top discourages overhead storage and raised leveling feet keep the floor perimeter visible.

Les applications typiques

Pharmaceutical cleanroom changing areasBiotechnology gowning roomsMedical-device cleanroom personnel entrancesMicroelectronics personnel airlocksHygienic food-production changing rooms

Paramètres techniques

Typical configurable specifications for a three-compartment stainless cleanroom garment locker are listed below.

Matériaux de base	Type 304L stainless steel welded carcass with three full-height internal dividers, hat shelves, garment rails and perforated shoe shelves
Panneau épaisseur	1.2–1.5 mm locker body, doors and internal partitions
Largeur effective	900 mm overall width for three personnel compartments
Longueur maximale	2000 mm maximum height at the rear of the sloped top
Acier face épaisseur	1.2–1.5 mm Type 304L stainless door skins and enclosure panels
Densité Core	7900–8000 kg/m³ for Type 304L stainless steel
Conductivité thermique	14–16 W/(m·K) for Type 304L stainless steel
surface finie	Brushed No. 4 stainless with blue identification holders, black keyed locks and blue non-marking leveling pads
Type joint	Continuously welded carcass and sealed dividers with folded-return doors, concealed hinges and individual compression locks
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

One- through ten-tier door arrangementsType 316L electropolished constructionElectronic combination or RFID locksPerforated doors for ventilated storage

Planning a Cleanroom Garment Locker specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe