Temiz Oda Giyim Dolabı
- Three independent user compartments
- Individual keyed compression locks
- Hat shelf garment rail and shoe shelf
- Sloped top with raised cleanable base
Ürün tanıtımı
The cleanroom garment locker divides a fully welded Type 304L stainless enclosure into three narrow, full-height personnel compartments. Each compartment has its own keyed compression lock, blue identification holder, upper hat shelf, stainless hanging rail and perforated lower shoe shelf, so one operator's gowning set does not mix with another's. The sloped roof removes a horizontal storage ledge, while integral stainless legs leave the floor visible beneath the locker. Folded door returns, sealed divider edges and radiused internal corners support direct wiping without exposed raw edges.
Ana Özellikler
An upper shelf, closed-loop hanger rail and perforated lower shoe shelf organize headwear, coveralls and footwear vertically.
Blue identification holders provide a visible assignment point without marking the stainless door surface.
The sloped roof and 150 mm raised base expose the areas where loose items and floor residue commonly accumulate.
Müşteri Ürün Sorunları
Personnel garments need secure individual storage while the locker itself remains accessible for routine cleaning and assignment changes.
Tipik uygulamalar
Teknik parametreler
Typical configurable specifications for a three-compartment stainless cleanroom garment locker are listed below.
| Temel malzemeler | Type 304L stainless steel welded carcass with three full-height internal dividers, hat shelves, garment rails and perforated shoe shelves |
|---|---|
| Panel kalınlığı | 1.2–1.5 mm locker body, doors and internal partitions |
| Effective Width (Etkili Genişlik) | 900 mm overall width for three personnel compartments |
| Maksimum uzunluk | 2000 mm maximum height at the rear of the sloped top |
| Çelik yüz yüze kalınlığı | 1.2–1.5 mm Type 304L stainless door skins and enclosure panels |
| Core Density (Çekirdek Yoğunluğu) | 7900–8000 kg/m³ for Type 304L stainless steel |
| Termal İletkenlik | 14–16 W/(m·K) for Type 304L stainless steel |
| Yüzey bitirme | Brushed No. 4 stainless with blue identification holders, black keyed locks and blue non-marking leveling pads |
| Ortak tip | Continuously welded carcass and sealed dividers with folded-return doors, concealed hinges and individual compression locks |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Planning a Cleanroom Garment Locker specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca