Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Z Exibição Ambiental Cleanroom
A flush wall display that presents cleanroom pressure, temperature, humidity and alarm condition in one easily interpreted room-status screen.
- Multi-Parameter Room View
- Color-Coded Status
- Large Corridor Readability
- Flush Cleanroom Bezel
Introdução do produto
The cleanroom environmental display receives measurements from room sensors or the monitoring network and organizes them on one high-contrast screen. Large primary values remain readable from the corridor, while color bands distinguish normal, warning and alarm conditions without requiring staff to interpret every number. A flush stainless or smooth white bezel limits exposed edges, and configurable room names match the facility layout. Touch access can be restricted to viewing only, with configuration and acknowledgement permissions assigned separately.
Características-chave
Consistent green, amber and red status colors communicate room condition quickly.
A flush bezel reduces protrusion and supports routine wipe-down around the display.
Configurable layouts prioritize the parameters and room name relevant to each location.
Preocupações do produto do cliente
A room display must communicate the current environmental state at a glance without becoming a second uncontrolled control interface.
Staff must read several small instruments before entering a room.One screen combines the essential room parameters with a clear overall status banner.
Normal and alarm values look visually similar from the corridor.Large color-coded status areas make abnormal conditions obvious at viewing distance.
A protruding display bezel creates hard-to-clean ledges.A flush stainless or smooth white face sits close to the wall panel surface.
Anyone can change alarm limits from the room display.Role-based or locked configuration keeps the normal interface view-only.
Aplicações típicas
Pharmaceutical cleanroom entrancesHospital isolation-room entrancesLaboratory corridor displaysControlled production room status
Parâmetros técnicos
Typical materials and dimensions for a flush cleanroom environmental display are listed below.
| Material principal | Industrial LCD behind tempered glass with 304 stainless steel or powder-coated steel bezel |
|---|---|
| Painel de espessura | 45-90 mm display depth |
| Largura efetiva | 200-450 mm front bezel width |
| Comprimento máximo | Up to 600 mm bezel dimension |
| Aço enfrentando espessura | 1.0-1.5 mm 304 stainless or powder-coated steel bezel |
| Densidade Core | 7900-8030 kg/m³ for stainless bezel components |
| Condutividade térmica | 14-17 W/(m·K) for 304 stainless steel bezel |
| Superfície acabado | Brushed stainless or smooth white bezel with black glass and green-amber-red screen graphics |
| Tipo conjunto | Flush wall cassette with gasketed front, rear power and network connectors |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Stainless or white bezelTouch or non-touch screenLocal sensor inputsBACnet, Modbus or Ethernet
Planning a Cleanroom Environmental Display specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
