English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
Cleanroom عرض بيئي
A flush wall display that presents cleanroom pressure, temperature, humidity and alarm condition in one easily interpreted room-status screen.
- Multi-Parameter Room View
- Color-Coded Status
- Large Corridor Readability
- Flush Cleanroom Bezel
مقدمة المنتج
The cleanroom environmental display receives measurements from room sensors or the monitoring network and organizes them on one high-contrast screen. Large primary values remain readable from the corridor, while color bands distinguish normal, warning and alarm conditions without requiring staff to interpret every number. A flush stainless or smooth white bezel limits exposed edges, and configurable room names match the facility layout. Touch access can be restricted to viewing only, with configuration and acknowledgement permissions assigned separately.
الخصائص الرئيسية
Consistent green, amber and red status colors communicate room condition quickly.
A flush bezel reduces protrusion and supports routine wipe-down around the display.
Configurable layouts prioritize the parameters and room name relevant to each location.
مخاوف المنتج للعملاء
A room display must communicate the current environmental state at a glance without becoming a second uncontrolled control interface.
Staff must read several small instruments before entering a room.One screen combines the essential room parameters with a clear overall status banner.
Normal and alarm values look visually similar from the corridor.Large color-coded status areas make abnormal conditions obvious at viewing distance.
A protruding display bezel creates hard-to-clean ledges.A flush stainless or smooth white face sits close to the wall panel surface.
Anyone can change alarm limits from the room display.Role-based or locked configuration keeps the normal interface view-only.
تطبيقات نموذجية
Pharmaceutical cleanroom entrancesHospital isolation-room entrancesLaboratory corridor displaysControlled production room status
المعلمات الفنية
Typical materials and dimensions for a flush cleanroom environmental display are listed below.
| المواد الأساسية | Industrial LCD behind tempered glass with 304 stainless steel or powder-coated steel bezel |
|---|---|
| سمك اللوحة | 45-90 mm display depth |
| العرض الفعال | 200-450 mm front bezel width |
| الحد الأقصى الطول | Up to 600 mm bezel dimension |
| الصلب يواجه سمك | 1.0-1.5 mm 304 stainless or powder-coated steel bezel |
| الكثافة الأساسية | 7900-8030 kg/m³ for stainless bezel components |
| الموصلية الحرارية | 14-17 W/(m·K) for 304 stainless steel bezel |
| إنهاء السطح | Brushed stainless or smooth white bezel with black glass and green-amber-red screen graphics |
| نوع المشترك | Flush wall cassette with gasketed front, rear power and network connectors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Stainless or white bezelTouch or non-touch screenLocal sensor inputsBACnet, Modbus or Ethernet
Planning a Cleanroom Environmental Display specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
