Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de contrôle des salles blanches et de surveillance environnementale
Affichage environnemental Cleanroom
A flush wall display that presents cleanroom pressure, temperature, humidity and alarm condition in one easily interpreted room-status screen.
- Multi-Parameter Room View
- Color-Coded Status
- Large Corridor Readability
- Flush Cleanroom Bezel
Introduction de produit
The cleanroom environmental display receives measurements from room sensors or the monitoring network and organizes them on one high-contrast screen. Large primary values remain readable from the corridor, while color bands distinguish normal, warning and alarm conditions without requiring staff to interpret every number. A flush stainless or smooth white bezel limits exposed edges, and configurable room names match the facility layout. Touch access can be restricted to viewing only, with configuration and acknowledgement permissions assigned separately.
Key Features
Consistent green, amber and red status colors communicate room condition quickly.
A flush bezel reduces protrusion and supports routine wipe-down around the display.
Configurable layouts prioritize the parameters and room name relevant to each location.
Préoccupations du client produit
A room display must communicate the current environmental state at a glance without becoming a second uncontrolled control interface.
Staff must read several small instruments before entering a room.One screen combines the essential room parameters with a clear overall status banner.
Normal and alarm values look visually similar from the corridor.Large color-coded status areas make abnormal conditions obvious at viewing distance.
A protruding display bezel creates hard-to-clean ledges.A flush stainless or smooth white face sits close to the wall panel surface.
Anyone can change alarm limits from the room display.Role-based or locked configuration keeps the normal interface view-only.
Les applications typiques
Pharmaceutical cleanroom entrancesHospital isolation-room entrancesLaboratory corridor displaysControlled production room status
Paramètres techniques
Typical materials and dimensions for a flush cleanroom environmental display are listed below.
| Matériaux de base | Industrial LCD behind tempered glass with 304 stainless steel or powder-coated steel bezel |
|---|---|
| Panneau épaisseur | 45-90 mm display depth |
| Largeur effective | 200-450 mm front bezel width |
| Longueur maximale | Up to 600 mm bezel dimension |
| Acier face épaisseur | 1.0-1.5 mm 304 stainless or powder-coated steel bezel |
| Densité Core | 7900-8030 kg/m³ for stainless bezel components |
| Conductivité thermique | 14-17 W/(m·K) for 304 stainless steel bezel |
| surface finie | Brushed stainless or smooth white bezel with black glass and green-amber-red screen graphics |
| Type joint | Flush wall cassette with gasketed front, rear power and network connectors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Stainless or white bezelTouch or non-touch screenLocal sensor inputsBACnet, Modbus or Ethernet
Planning a Cleanroom Environmental Display specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
