Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Capuz de fluxo laminar suspenso no teto
An overhead HEPA-filtered hood suspended above process equipment to create a defined downward clean-air zone without floor-mounted supports.
- Floor-Free Suspension
- Overhead HEPA Downflow
- Adjustable Hanging Height
- Optional Flexible Curtains
Introdução do produto
The suspended hood mounts from the building structure above a filling point, inspection table or compact process machine. A rigid supply plenum distributes HEPA-filtered air through the lower diffuser, while adjustable threaded hangers set the operating height and maintain level. Optional clear curtains extend the protected zone without permanent walls. Structural loads, electrical routing and service clearance are coordinated above the ceiling, leaving the floor around the process accessible.
Características-chave
A pressure-equalizing plenum supplies the complete lower diffuser evenly.
Height-adjustable hangers accommodate equipment and ceiling variations.
Flexible clear curtains can limit cross-drafts around selected sides.
A hinged or lift-down filter panel allows service from the clean side when required.
Preocupações do produto do cliente
An overhead hood must deliver an even clean-air footprint while remaining structurally secure and serviceable above operating equipment.
Floor legs obstruct carts and cleaning around the process.Ceiling suspension leaves the floor perimeter open.
An uneven hanging frame tilts the airflow diffuser.Individually adjustable hangers allow the plenum to be leveled after installation.
Room cross-drafts shorten the protected downflow zone.Optional clear curtains extend from the hood edge around the critical process area.
Filter replacement conflicts with equipment below.A selected top-service or clean-side lift-down arrangement matches the available access route.
Aplicações típicas
Open-vial handling zonesClean filling-point coveragePrecision assembly islandsInspection tables beneath high ceilings
Parâmetros técnicos
Typical configurable construction ranges for a ceiling-suspended laminar flow hood are listed below.
| Material principal | Anodized aluminum plenum frame with powder-coated steel skins and aluminum honeycomb diffuser panels |
|---|---|
| Painel de espessura | 40-80 mm plenum and diffuser assembly |
| Largura efetiva | 1200-3000 mm protected airflow width |
| Comprimento máximo | Up to 4000 mm protected airflow length |
| Aço enfrentando espessura | 0.8-1.2 mm powder-coated steel plenum skins |
| Densidade Core | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Condutividade térmica | 1.5-2.5 W/(m·K) across the aluminum honeycomb diffuser assembly |
| Superfície acabado | White powder-coated plenum with natural anodized frame and clear PVC curtain option |
| Tipo conjunto | Bolted suspension frame with gasketed filter modules and sealed plenum flanges |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Top-service or room-side filter accessFlexible clear curtainsIntegrated LED lightingRemote or plenum-mounted EC fans
Planning a Ceiling-Suspended Laminar Flow Hood specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
