Complete ceiling-suspended laminar flow hood with four hanger rods

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

천장 Suspended Laminar Flow Hood

An overhead HEPA-filtered hood suspended above process equipment to create a defined downward clean-air zone without floor-mounted supports.

Floor-Free Suspension
Overhead HEPA Downflow
Adjustable Hanging Height
Optional Flexible Curtains

견적 요청 제품 찾아보기

상품 소개

The suspended hood mounts from the building structure above a filling point, inspection table or compact process machine. A rigid supply plenum distributes HEPA-filtered air through the lower diffuser, while adjustable threaded hangers set the operating height and maintain level. Optional clear curtains extend the protected zone without permanent walls. Structural loads, electrical routing and service clearance are coordinated above the ceiling, leaving the floor around the process accessible.

주요 기능

Four-point suspension keeps posts and bases away from the process floor.

A pressure-equalizing plenum supplies the complete lower diffuser evenly.

Height-adjustable hangers accommodate equipment and ceiling variations.

Flexible clear curtains can limit cross-drafts around selected sides.

A hinged or lift-down filter panel allows service from the clean side when required.

고객 제품 관심사

An overhead hood must deliver an even clean-air footprint while remaining structurally secure and serviceable above operating equipment.

Floor legs obstruct carts and cleaning around the process.Ceiling suspension leaves the floor perimeter open.

An uneven hanging frame tilts the airflow diffuser.Individually adjustable hangers allow the plenum to be leveled after installation.

Room cross-drafts shorten the protected downflow zone.Optional clear curtains extend from the hood edge around the critical process area.

Filter replacement conflicts with equipment below.A selected top-service or clean-side lift-down arrangement matches the available access route.

일반적인 응용 프로그램

Open-vial handling zonesClean filling-point coveragePrecision assembly islandsInspection tables beneath high ceilings

기술 매개변수

Typical configurable construction ranges for a ceiling-suspended laminar flow hood are listed below.

핵심 재료	Anodized aluminum plenum frame with powder-coated steel skins and aluminum honeycomb diffuser panels
패널 두께	40-80 mm plenum and diffuser assembly
유효 폭	1200-3000 mm protected airflow width
최대 길이	Up to 4000 mm protected airflow length
강철 면면 두께	0.8-1.2 mm powder-coated steel plenum skins
코어 밀도	30 - 50 kg / m 3 알루미늄 벌집 확산 코어
열전도도 (Thermal Conductivity)	1.5-2.5 W/(m·K) across the aluminum honeycomb diffuser assembly
표면 마무리	White powder-coated plenum with natural anodized frame and clear PVC curtain option
접합 유형	Bolted suspension frame with gasketed filter modules and sealed plenum flanges
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Top-service or room-side filter accessFlexible clear curtainsIntegrated LED lightingRemote or plenum-mounted EC fans

Planning a Ceiling-Suspended Laminar Flow Hood specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.