Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Capó de flujo laminar suspendido por
An overhead HEPA-filtered hood suspended above process equipment to create a defined downward clean-air zone without floor-mounted supports.
- Floor-Free Suspension
- Overhead HEPA Downflow
- Adjustable Hanging Height
- Optional Flexible Curtains
Introducción del producto
The suspended hood mounts from the building structure above a filling point, inspection table or compact process machine. A rigid supply plenum distributes HEPA-filtered air through the lower diffuser, while adjustable threaded hangers set the operating height and maintain level. Optional clear curtains extend the protected zone without permanent walls. Structural loads, electrical routing and service clearance are coordinated above the ceiling, leaving the floor around the process accessible.
Características clave
A pressure-equalizing plenum supplies the complete lower diffuser evenly.
Height-adjustable hangers accommodate equipment and ceiling variations.
Flexible clear curtains can limit cross-drafts around selected sides.
A hinged or lift-down filter panel allows service from the clean side when required.
Preocupaciones del producto del cliente
An overhead hood must deliver an even clean-air footprint while remaining structurally secure and serviceable above operating equipment.
Floor legs obstruct carts and cleaning around the process.Ceiling suspension leaves the floor perimeter open.
An uneven hanging frame tilts the airflow diffuser.Individually adjustable hangers allow the plenum to be leveled after installation.
Room cross-drafts shorten the protected downflow zone.Optional clear curtains extend from the hood edge around the critical process area.
Filter replacement conflicts with equipment below.A selected top-service or clean-side lift-down arrangement matches the available access route.
Aplicaciones típicas
Open-vial handling zonesClean filling-point coveragePrecision assembly islandsInspection tables beneath high ceilings
Parámetros técnicos
Typical configurable construction ranges for a ceiling-suspended laminar flow hood are listed below.
| Materiales Core | Anodized aluminum plenum frame with powder-coated steel skins and aluminum honeycomb diffuser panels |
|---|---|
| Panel de espesor | 40-80 mm plenum and diffuser assembly |
| Ancho efectivo | 1200-3000 mm protected airflow width |
| Longitud máxima | Up to 4000 mm protected airflow length |
| Acero frente a espesor | 0.8-1.2 mm powder-coated steel plenum skins |
| Densidad Core | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Conductividad térmica | 1.5-2.5 W/(m·K) across the aluminum honeycomb diffuser assembly |
| Superficie acabada | White powder-coated plenum with natural anodized frame and clear PVC curtain option |
| Tipo conjunto | Bolted suspension frame with gasketed filter modules and sealed plenum flanges |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Top-service or room-side filter accessFlexible clear curtainsIntegrated LED lightingRemote or plenum-mounted EC fans
Planning a Ceiling-Suspended Laminar Flow Hood specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
