Equipamento de manuseio de ar e HVAC para sala limpa

Unidade de manuseio de ar montada no teto

A low-profile horizontal air handler that places filters, coil and fan above a ceiling where plant-room floor area is unavailable.

Low-Profile Casing
Bottom Service Access
Direct-Drive Fan
Condensate-Safe Installation

Solicite um orçamento. Browse produtos

Introdução do produto

The ceiling-mounted air handling unit condenses the required filter, coil, drain pan and fan functions into a shallow casing suspended above a corridor or support area. Hinged or removable lower panels provide service access without requiring side clearance. A direct-drive fan avoids belt maintenance in the restricted ceiling void, while a full-width drain pan and correctly trapped outlet protect the ceiling below. Flexible connections and vibration isolators limit structure-borne noise.

Características-chave

A shallow horizontal casing uses ceiling-void space while preserving occupied floor area.

Bottom-access filters and fan assemblies can be serviced from a defined ceiling hatch.

A full-width sloped drain pan controls condensate beneath the cooling coil.

Direct-drive EC or plug fans provide airflow turndown without belt adjustment overhead.

Preocupações do produto do cliente

Ceiling equipment must remain shallow, drain reliably and permit maintenance from below without contaminating the occupied space.

Side-mounted filters cannot be removed because ducts and services fill the ceiling void.Bottom-access filter tracks align with a dedicated service hatch.

A blocked drain causes water to damage the ceiling below.A sloped pan, trapped primary drain and optional overflow switch provide layered condensate protection.

Fan vibration is audible through the ceiling structure.Spring or rubber isolators and flexible duct connections decouple the unit from the building.

A deep fan section cannot fit between structure and ceiling.Compact backward-curved direct-drive fans reduce total casing height.

Aplicações típicas

Cleanroom support corridorsLaboratory ceiling voidsMedical clean spacesSmall production suitesRetrofit ventilation zones

Parâmetros técnicos

Representative construction ranges for a low-profile ceiling air handler are shown below.

Material principal	Closed-cell polyurethane or mineral-wool acoustic insulation within double-skin casing
Painel de espessura	25–50 mm insulated low-profile panel
Largura efetiva	700–2200 mm nominal casing width
Comprimento máximo	Up to 5000 mm overall suspended length
Aço enfrentando espessura	0.5–0.75 mm galvanized or coated sheet skins
Densidade Core	38–44 kg/m³ polyurethane or 64–90 kg/m³ mineral wool
Condutividade térmica	0.023–0.040 W/(m·K) according to insulation
Superfície acabado	Powder-coated galvanized outer casing with smooth galvanized inner liner
Tipo conjunto	Gasketed folded-panel joints with bottom-access doors and flexible duct collars
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Chilled-water or DX cooling coilElectric or hot-water heating coilEC fan and constant-airflow controlPrimary and secondary drain-pan protection

Planning a Ceiling-Mounted Air Handling Unit specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe