ОВК и оборудование для обработки воздуха в чистых помещениях

Установка воздуха на потолке

A low-profile horizontal air handler that places filters, coil and fan above a ceiling where plant-room floor area is unavailable.

Low-Profile Casing
Bottom Service Access
Direct-Drive Fan
Condensate-Safe Installation

Запрос котировки Просмотреть продукты

Введение продукции

The ceiling-mounted air handling unit condenses the required filter, coil, drain pan and fan functions into a shallow casing suspended above a corridor or support area. Hinged or removable lower panels provide service access without requiring side clearance. A direct-drive fan avoids belt maintenance in the restricted ceiling void, while a full-width drain pan and correctly trapped outlet protect the ceiling below. Flexible connections and vibration isolators limit structure-borne noise.

Основные характеристики

A shallow horizontal casing uses ceiling-void space while preserving occupied floor area.

Bottom-access filters and fan assemblies can be serviced from a defined ceiling hatch.

A full-width sloped drain pan controls condensate beneath the cooling coil.

Direct-drive EC or plug fans provide airflow turndown without belt adjustment overhead.

Обеспокоенность клиентов продуктами

Ceiling equipment must remain shallow, drain reliably and permit maintenance from below without contaminating the occupied space.

Side-mounted filters cannot be removed because ducts and services fill the ceiling void.Bottom-access filter tracks align with a dedicated service hatch.

A blocked drain causes water to damage the ceiling below.A sloped pan, trapped primary drain and optional overflow switch provide layered condensate protection.

Fan vibration is audible through the ceiling structure.Spring or rubber isolators and flexible duct connections decouple the unit from the building.

A deep fan section cannot fit between structure and ceiling.Compact backward-curved direct-drive fans reduce total casing height.

Типичные приложения

Cleanroom support corridorsLaboratory ceiling voidsMedical clean spacesSmall production suitesRetrofit ventilation zones

Технические параметры

Representative construction ranges for a low-profile ceiling air handler are shown below.

Основной материал	Closed-cell polyurethane or mineral-wool acoustic insulation within double-skin casing
Толщина панели	25–50 mm insulated low-profile panel
эффективная ширина	700–2200 mm nominal casing width
Максимальная длина	Up to 5000 mm overall suspended length
Толщина линий стали	0.5–0.75 mm galvanized or coated sheet skins
Плотность ядра	38–44 kg/m³ polyurethane or 64–90 kg/m³ mineral wool
Теплопроводимость	0.023–0.040 W/(m·K) according to insulation
Поверхностная отделка	Powder-coated galvanized outer casing with smooth galvanized inner liner
Объединенный тип	Gasketed folded-panel joints with bottom-access doors and flexible duct collars
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Chilled-water or DX cooling coilElectric or hot-water heating coilEC fan and constant-airflow controlPrimary and secondary drain-pan protection

Planning a Ceiling-Mounted Air Handling Unit specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой