Temiz Oda HVAC ve Hava İşleme Ekipmanları

Ceiling-Mount Air Handling Unit (Tavana monte edilmiş hava taşıma ünitesi)

A low-profile horizontal air handler that places filters, coil and fan above a ceiling where plant-room floor area is unavailable.

Low-Profile Casing
Bottom Service Access
Direct-Drive Fan
Condensate-Safe Installation

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The ceiling-mounted air handling unit condenses the required filter, coil, drain pan and fan functions into a shallow casing suspended above a corridor or support area. Hinged or removable lower panels provide service access without requiring side clearance. A direct-drive fan avoids belt maintenance in the restricted ceiling void, while a full-width drain pan and correctly trapped outlet protect the ceiling below. Flexible connections and vibration isolators limit structure-borne noise.

Ana Özellikler

A shallow horizontal casing uses ceiling-void space while preserving occupied floor area.

Bottom-access filters and fan assemblies can be serviced from a defined ceiling hatch.

A full-width sloped drain pan controls condensate beneath the cooling coil.

Direct-drive EC or plug fans provide airflow turndown without belt adjustment overhead.

Müşteri Ürün Sorunları

Ceiling equipment must remain shallow, drain reliably and permit maintenance from below without contaminating the occupied space.

Side-mounted filters cannot be removed because ducts and services fill the ceiling void.Bottom-access filter tracks align with a dedicated service hatch.

A blocked drain causes water to damage the ceiling below.A sloped pan, trapped primary drain and optional overflow switch provide layered condensate protection.

Fan vibration is audible through the ceiling structure.Spring or rubber isolators and flexible duct connections decouple the unit from the building.

A deep fan section cannot fit between structure and ceiling.Compact backward-curved direct-drive fans reduce total casing height.

Tipik uygulamalar

Cleanroom support corridorsLaboratory ceiling voidsMedical clean spacesSmall production suitesRetrofit ventilation zones

Teknik parametreler

Representative construction ranges for a low-profile ceiling air handler are shown below.

Temel malzemeler	Closed-cell polyurethane or mineral-wool acoustic insulation within double-skin casing
Panel kalınlığı	25–50 mm insulated low-profile panel
Effective Width (Etkili Genişlik)	700–2200 mm nominal casing width
Maksimum uzunluk	Up to 5000 mm overall suspended length
Çelik yüz yüze kalınlığı	0.5–0.75 mm galvanized or coated sheet skins
Core Density (Çekirdek Yoğunluğu)	38–44 kg/m³ polyurethane or 64–90 kg/m³ mineral wool
Termal İletkenlik	0.023–0.040 W/(m·K) according to insulation
Yüzey bitirme	Powder-coated galvanized outer casing with smooth galvanized inner liner
Ortak tip	Gasketed folded-panel joints with bottom-access doors and flexible duct collars
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Chilled-water or DX cooling coilElectric or hot-water heating coilEC fan and constant-airflow controlPrimary and secondary drain-pan protection

Planning a Ceiling-Mounted Air Handling Unit specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun