Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de Distribuição de Ar para Sala Limpa
Mangueira de dutos flexíveis antiestática
A permanently antistatic polyurethane duct hose with an embedded steel helix for extracting dust, powder and fibers from sensitive production equipment.
- Permanently Antistatic Wall
- Abrasion-Resistant Polyurethane
- Embedded Spring-Steel Helix
- Flexible Equipment Connection
Introdução do produto
Antistatic flexible duct hose is designed for moving dry particles or process air where friction against an insulating hose wall could accumulate electrostatic charge. A conductive or permanently antistatic polyurethane wall is reinforced by an embedded spring-steel helix that can be electrically bonded at the connection. The smooth inner contour reduces particle deposits, while the flexible body follows movable extract arms and production equipment. Hose resistance, grounding method and material compatibility are selected for the conveyed media and area classification.
Características-chave
An embedded steel helix reinforces the bore and provides a defined bonding path at each end.
Abrasion-resistant wall material withstands dry powder and fiber extraction better than light fabric duct.
Flexible geometry accommodates moving pickup points and machine vibration without rigid elbows.
Preocupações do produto do cliente
Static control requires both a suitable hose wall and a continuous electrical path through the fittings, clamps and equipment bonding network.
Dry powder flow charges an ordinary insulating hose surface.A permanently antistatic wall controls surface resistance throughout the hose material.
The hose is antistatic but its wire helix is not bonded at the machine connection.Conductive fittings and verified bonding connect the reinforcement to the facility grounding path.
A thin hose wears through at the outside of repeated bends.Abrasion-resistant polyurethane and a controlled minimum bend radius extend service life.
Powder accumulates inside deep corrugations and contaminates later batches.A flow-optimized inner wall and short routing reduce ledges and retained material.
Aplicações típicas
Powder-dispensing extractionTablet and capsule dust collectionElectronics production vacuum linesPackaging-machine local exhaustFiber and granule transfer air
Parâmetros técnicos
Typical construction ranges for permanently antistatic flexible extraction hose are summarized below.
| Material principal | Permanently antistatic ether-polyurethane with embedded spring-steel helix |
|---|---|
| Painel de espessura | 0.7–1.5 mm hose wall, depending on duty |
| Largura efetiva | 40–400 mm nominal internal diameter |
| Comprimento máximo | 10000–15000 mm supplied coil length |
| Aço enfrentando espessura | 1.0–3.0 mm embedded spring-steel wire diameter |
| Densidade Core | Approximately 1100–1250 kg/m³ polyurethane wall material |
| Condutividade térmica | Approximately 0.20–0.30 W/(m·K) for polyurethane elastomer |
| Superfície acabado | Smooth translucent or black antistatic polyurethane inner wall |
| Tipo conjunto | Conductive cuff or spigot connection with bonded helix and stainless clamp |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Antistatic below 10⁹ Ω or electrically conductive gradeLight, medium or heavy wallFood-contact-compatible polyurethaneConductive cuffs, clamps and grounding leads
Planning a Antistatic Flexible Duct Hose specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
