Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Luftverteilungssysteme
Antistatische Flexible Duct Hose
A permanently antistatic polyurethane duct hose with an embedded steel helix for extracting dust, powder and fibers from sensitive production equipment.
- Permanently Antistatic Wall
- Abrasion-Resistant Polyurethane
- Embedded Spring-Steel Helix
- Flexible Equipment Connection
Produkteinführung
Antistatic flexible duct hose is designed for moving dry particles or process air where friction against an insulating hose wall could accumulate electrostatic charge. A conductive or permanently antistatic polyurethane wall is reinforced by an embedded spring-steel helix that can be electrically bonded at the connection. The smooth inner contour reduces particle deposits, while the flexible body follows movable extract arms and production equipment. Hose resistance, grounding method and material compatibility are selected for the conveyed media and area classification.
Key Features
An embedded steel helix reinforces the bore and provides a defined bonding path at each end.
Abrasion-resistant wall material withstands dry powder and fiber extraction better than light fabric duct.
Flexible geometry accommodates moving pickup points and machine vibration without rigid elbows.
Kunden Produktbedenken
Static control requires both a suitable hose wall and a continuous electrical path through the fittings, clamps and equipment bonding network.
Dry powder flow charges an ordinary insulating hose surface.A permanently antistatic wall controls surface resistance throughout the hose material.
The hose is antistatic but its wire helix is not bonded at the machine connection.Conductive fittings and verified bonding connect the reinforcement to the facility grounding path.
A thin hose wears through at the outside of repeated bends.Abrasion-resistant polyurethane and a controlled minimum bend radius extend service life.
Powder accumulates inside deep corrugations and contaminates later batches.A flow-optimized inner wall and short routing reduce ledges and retained material.
Typische Anwendungen
Powder-dispensing extractionTablet and capsule dust collectionElectronics production vacuum linesPackaging-machine local exhaustFiber and granule transfer air
Technische Parameter
Typical construction ranges for permanently antistatic flexible extraction hose are summarized below.
| Core Material | Permanently antistatic ether-polyurethane with embedded spring-steel helix |
|---|---|
| Panel Dicke | 0.7–1.5 mm hose wall, depending on duty |
| Effektive Breite | 40–400 mm nominal internal diameter |
| Maximale Länge | 10000–15000 mm supplied coil length |
| Stahl facing Dicke | 1.0–3.0 mm embedded spring-steel wire diameter |
| Kerndichte | Approximately 1100–1250 kg/m³ polyurethane wall material |
| Thermische Leitfähigkeit | Approximately 0.20–0.30 W/(m·K) for polyurethane elastomer |
| Oberfläche Finish | Smooth translucent or black antistatic polyurethane inner wall |
| Gemeinsamer Typ | Conductive cuff or spigot connection with bonded helix and stainless clamp |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Antistatic below 10⁹ Ω or electrically conductive gradeLight, medium or heavy wallFood-contact-compatible polyurethaneConductive cuffs, clamps and grounding leads
Planning a Antistatic Flexible Duct Hose specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
