English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة توزيع الهواء في الغرف النظيفة
Aنتستاتيكية خرطوم قناة مرنة
A permanently antistatic polyurethane duct hose with an embedded steel helix for extracting dust, powder and fibers from sensitive production equipment.
- Permanently Antistatic Wall
- Abrasion-Resistant Polyurethane
- Embedded Spring-Steel Helix
- Flexible Equipment Connection
مقدمة المنتج
Antistatic flexible duct hose is designed for moving dry particles or process air where friction against an insulating hose wall could accumulate electrostatic charge. A conductive or permanently antistatic polyurethane wall is reinforced by an embedded spring-steel helix that can be electrically bonded at the connection. The smooth inner contour reduces particle deposits, while the flexible body follows movable extract arms and production equipment. Hose resistance, grounding method and material compatibility are selected for the conveyed media and area classification.
الخصائص الرئيسية
An embedded steel helix reinforces the bore and provides a defined bonding path at each end.
Abrasion-resistant wall material withstands dry powder and fiber extraction better than light fabric duct.
Flexible geometry accommodates moving pickup points and machine vibration without rigid elbows.
مخاوف المنتج للعملاء
Static control requires both a suitable hose wall and a continuous electrical path through the fittings, clamps and equipment bonding network.
Dry powder flow charges an ordinary insulating hose surface.A permanently antistatic wall controls surface resistance throughout the hose material.
The hose is antistatic but its wire helix is not bonded at the machine connection.Conductive fittings and verified bonding connect the reinforcement to the facility grounding path.
A thin hose wears through at the outside of repeated bends.Abrasion-resistant polyurethane and a controlled minimum bend radius extend service life.
Powder accumulates inside deep corrugations and contaminates later batches.A flow-optimized inner wall and short routing reduce ledges and retained material.
تطبيقات نموذجية
Powder-dispensing extractionTablet and capsule dust collectionElectronics production vacuum linesPackaging-machine local exhaustFiber and granule transfer air
المعلمات الفنية
Typical construction ranges for permanently antistatic flexible extraction hose are summarized below.
| المواد الأساسية | Permanently antistatic ether-polyurethane with embedded spring-steel helix |
|---|---|
| سمك اللوحة | 0.7–1.5 mm hose wall, depending on duty |
| العرض الفعال | 40–400 mm nominal internal diameter |
| الحد الأقصى الطول | 10000–15000 mm supplied coil length |
| الصلب يواجه سمك | 1.0–3.0 mm embedded spring-steel wire diameter |
| الكثافة الأساسية | Approximately 1100–1250 kg/m³ polyurethane wall material |
| الموصلية الحرارية | Approximately 0.20–0.30 W/(m·K) for polyurethane elastomer |
| إنهاء السطح | Smooth translucent or black antistatic polyurethane inner wall |
| نوع المشترك | Conductive cuff or spigot connection with bonded helix and stainless clamp |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Antistatic below 10⁹ Ω or electrically conductive gradeLight, medium or heavy wallFood-contact-compatible polyurethaneConductive cuffs, clamps and grounding leads
Planning a Antistatic Flexible Duct Hose specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
