Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Filtro molecular de gás ácido
A rigid molecular-filter cell filled with acid-targeted adsorbent to reduce corrosive gaseous contaminants before they reach clean processes and sensitive electronics.
- Acid-Selective Adsorbent
- Deep Media Bed
- Low-Dusting Retainers
- Gasketed Steel Cell
Introdução do produto
This filter places a packed bed of impregnated activated alumina, activated carbon or hybrid pellets between perforated retaining screens. The chemically treated surface captures and reacts with acidic gases such as hydrogen sulfide, sulfur dioxide, chlorine and selected nitrogen oxides. A sealed galvanized or stainless-steel frame prevents bypass, while fine outlet scrim limits carryover of adsorbent dust into controlled air systems. The configuration is suitable for make-up air, recirculation and corrosion-control stages where ordinary particle filters cannot remove molecules.
Características-chave
Impregnated media targets reactive acid gases rather than only general odours.
Corrosion-resistant screens support the pellet bed without obstructing airflow.
Replaceable or refillable constructions allow media selection to follow the contaminant profile.
Preocupações do produto do cliente
Trace acidic gases can corrode contacts and process surfaces even when particulate air quality appears acceptable.
Copper and silver contacts tarnish despite high-efficiency particle filtration.An acid-selective adsorbent stage removes molecular contaminants that pass through particulate media.
Loose pellets settle and create an untreated path at the top of the cell.Vibration-filled media and internal compression retain an even bed throughout transport and operation.
Adsorbent dust migrates toward sensitive production equipment.Perforated retainers and downstream nonwoven scrim contain fines inside the filter cell.
A single carbon grade performs poorly against a changing acid-gas mixture.Activated alumina, impregnated carbon or hybrid blends can be selected for the actual contaminant spectrum.
Aplicações típicas
Semiconductor make-up airData-centre corrosion controlPulp and paper control roomsChemical process ventilationWastewater odour treatment
Parâmetros técnicos
Typical construction ranges for an industrial acid-gas molecular filter are listed below.
| Material principal | Impregnated activated alumina, acid-grade activated carbon or hybrid spherical adsorbent |
|---|---|
| Painel de espessura | Profundidade total do filtro 150 - 292 mm |
| Largura efetiva | 305 - 610 mm Largura nominal da célula |
| Comprimento máximo | Até 610 mm de altura nominal da célula |
| Aço enfrentando espessura | 0.8–1.2 mm galvanized or 304 stainless-steel frame and screens |
| Densidade Core | 550–850 kg/m³ packed adsorbent bulk density |
| Condutividade térmica | 0.10–0.25 W/(m·K) for the packed adsorbent bed |
| Superfície acabado | Clean galvanized steel, brushed 304 stainless steel or white powder coat |
| Tipo conjunto | Rigid box cell with sealed media screens and continuous neoprene or EPDM face gasket |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Impregnated alumina or carbon mediaGalvanized or stainless-steel frameHalf-size and full-size cellsRefillable or disposable construction
Planning a Acid Gas Molecular Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
