Three-quarter view of acid gas molecular filter with deep adsorbent bed

エアフィルターと化学ろ過

酸性ガスの分子フィルター

A rigid molecular-filter cell filled with acid-targeted adsorbent to reduce corrosive gaseous contaminants before they reach clean processes and sensitive electronics.

Acid-Selective Adsorbent
Deep Media Bed
Low-Dusting Retainers
Gasketed Steel Cell

見積もりリクエスト製品案内

商品紹介

This filter places a packed bed of impregnated activated alumina, activated carbon or hybrid pellets between perforated retaining screens. The chemically treated surface captures and reacts with acidic gases such as hydrogen sulfide, sulfur dioxide, chlorine and selected nitrogen oxides. A sealed galvanized or stainless-steel frame prevents bypass, while fine outlet scrim limits carryover of adsorbent dust into controlled air systems. The configuration is suitable for make-up air, recirculation and corrosion-control stages where ordinary particle filters cannot remove molecules.

主要な特徴

Uniform bed depth avoids short air paths through the adsorbent.

Impregnated media targets reactive acid gases rather than only general odours.

Corrosion-resistant screens support the pellet bed without obstructing airflow.

Replaceable or refillable constructions allow media selection to follow the contaminant profile.

お客様の製品に関する懸念事項

Trace acidic gases can corrode contacts and process surfaces even when particulate air quality appears acceptable.

Copper and silver contacts tarnish despite high-efficiency particle filtration.An acid-selective adsorbent stage removes molecular contaminants that pass through particulate media.

Loose pellets settle and create an untreated path at the top of the cell.Vibration-filled media and internal compression retain an even bed throughout transport and operation.

Adsorbent dust migrates toward sensitive production equipment.Perforated retainers and downstream nonwoven scrim contain fines inside the filter cell.

A single carbon grade performs poorly against a changing acid-gas mixture.Activated alumina, impregnated carbon or hybrid blends can be selected for the actual contaminant spectrum.

典型的な用途

Semiconductor make-up airData-centre corrosion controlPulp and paper control roomsChemical process ventilationWastewater odour treatment

技術的なパラメータ

Typical construction ranges for an industrial acid-gas molecular filter are listed below.

コア材料	Impregnated activated alumina, acid-grade activated carbon or hybrid spherical adsorbent
パネルの厚さ	150 — 292 mm フィルター深度
有効幅	305–610 mm nominal cell width
最大長さ	Up to 610 mm nominal cell height
鋼鉄の厚さを直面する	0.8–1.2 mm galvanized or 304 stainless-steel frame and screens
コア密度	550–850 kg/m³ packed adsorbent bulk density
熱伝導率	0.10–0.25 W/(m·K) for the packed adsorbent bed
表面仕上げ	Clean galvanized steel, brushed 304 stainless steel or white powder coat
ジョイントタイプ	Rigid box cell with sealed media screens and continuous neoprene or EPDM face gasket
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Impregnated alumina or carbon mediaGalvanized or stainless-steel frameHalf-size and full-size cellsRefillable or disposable construction

Planning a Acid Gas Molecular Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する